9.10 Printing Charge Information
on SMDR
Used to print charge information on SMDR .
Operation
1. Set Charge Management
Mode.
2. Enter "6".
<All CO lines and account
codes>
3-1. Enter "0".
<All extensions>
3-2 Enter "1".
<Each extension>
3-3. Enter "2".
• Enter extension directory
number: three or four digits
<ATT Consoles>
3-4. Enter "3".
4. Press END.
Display/Indicator/Tone
•
Charge Meter
•
Print Mode?
Total CHG Print
Ext CHG Print
<Example>
100: CHG Print
•
ATT CHG Print
•
SYS–PGM No?
13-C-47
Comment/Note
• Refer to Section 13-C-9.02
"Entering Charge Management
Mode".
Error Messages
• When the printer is not ready.
SMDR Not Ready
• When the printer is in use.
SMDR Busy
• Repeat steps 3 through 6.
• Repeat steps 4 through 6.