Panasonic KX-TD500 System Reference Manual page 1322

2.02 PF Button Assignment for Digital
PITS (KX-T7235)
The KX-T7235 is equipped with 10 function keys
on the right and left sides of the LCD.
This telephone can program station speed dialing
to each button. Each button can be assigned a
dialing number and name.
• Storing a dialing number
Operation
To enter into the programming
mode
1. Set the MEMORY switch at
the rear of the PITS to
PROGRAM.
SET• • PROGRAM
MEMORY
• With DPITS, press the
PROGRAM button.
2. Press one of the function
keys to program.
PROGRAM
Soft 1 Soft 2 Soft 3
3. Enter the phone number to
program.
Result
• The following message
appears on the display:
PITS-PGM No.?
• The MEMORY button indicator
lights red.
• If a phone number has already
been stored in memory, the
number is displayed.
If not, "Not Stored" is
displayed.
1234567
SHIFT
PROGRAM
Soft 1
PROGRAM
Soft 1
13-C-10
Function
keys
PROGRAM
• This status is called "Initial
display for PITS station
programming mode".
• If the programming data of your
PITS has already been
accessed by another
administration device, the
following message appears on
the display.
Already Accessed
• If the END button is pressed
while programming, the above
message appears on the
display again.
CLR NEXT
SHIFT
Soft 2 Soft 3
• If you wish to cancel a stored
number, press the TRANSFER
button or CLR (S2).
9876543
CLR NEXT
SHIFT
Soft 2 Soft 3
Function
keys
SHIFT
Soft 1 Soft 2 Soft 3
Comment/Note
Continued