3.00 Timed Reminder (Alarm
Clock)
Description
The extension user can use his or her telephone
as an alarm clock.
When this feature is set, alarm tone will ring for 2
minutes at the programmed time.
Wake-up Call
By going off-hook, the extension user can hear
the wake-up message, if it has been recorded
beforehand.
The extension user may hear BGM or intermittent
tone (dial tone 2) instead of the wake-up
message.
(See Section 3-F-13.00 "Timed Reminder with
OGM (wake-up call)".)
This feature can be set to operate only once or
everyday at a specified time.
Programming
System Programming
"System-Numbering Plan (6/11)",
Timed Reminder Set
Timed Reminder Cancel
Conditions
(1) What if the extension is busy or off-hook at
the programmed time?
Alarm tone will ring after the extension goes
on-hook.
(2) What if a call comes in when alarm tone is
ringing?
The caller hears busy tone.
(3) Remote Timed Reminder
This feature can also be set by the Operator 1
or 2 to any extension.
(See Section 4-I-14.00 and Section
6-J-13.00 "Remote Timed Reminder-One
Time".)
(4) Newly programmed time overrides the old
one.
Only the latest setting is valid at a single
extension whether it was set by the extension
itself or by the operator.
Reference
VT
Dumb
10-D-6.06
11-C-11.00
5-G-7
(5) Tone Pattern
Alarm tone sounds in the following manner:
5.0 sec
Operation
Setting Timed Reminder
1. Lift the handset.
2. Dial the feature number for
"Timed Reminder Set" (Default :
*71).
3. Dial "hour" with two digits: 01 to
12.
4. Dial "minute" with two digits: 00 to
59.
5. Dial "0" for a.m. or dial "1" for p.m.
6. Dial "0" for Times Reminder-one
time, or dial "1" for Timed
Reminder-every day.
• You hear confirmation tone 1 or
2 and then dial tone 1, 3, or 4.
7. Replace the handset.