Out Of Service (Ous); Remove (Rem) - Panasonic KX-TD500 System Reference Manual

4.00 Out of Service (OUS)

Description
Allows you to change the status of cards, ports
and stations from "In Service" to "Out of Service".
The system should be in on-line communication
mode.
When setting the shelves or cards to "Out of
Service", then lower devices, such as stations,
ports etc. become "Out of Service" automatically.
(Password level : Two or higher)

5.00 Remove (REM)

Description
Enables you to delete the stored system
programming data by specifying stations, Attendant
Consoles and so on.
The system should be in on-line communication
mode.
Specified terminal must be in Out of Service.
(Password level:one)
Device
Port
Station
Attendant console
Item Number
10101 to 31416
DN XXXX
or
10101 to 31416
A1 or A2
or
10101 to 31416
For further information about Out of Service, refer
to Section 16-C-1.02 "OUS (Out of Service)
command".
Input Format
; OPE> OUS Item Number
Item numbers are same as those listed in 3.00 "In
Service (INS)" on the previous page.
Before you detach the installed devices, remove
the system programming data of associated
device using this command.
Input Format
; OPE> REM Item Number
Explanation
Physical number
Extension directory number (XXXX: three or four
digit number)
Physical number
Attendant Console number
Physical number
9-F-3