Panasonic KX-TD500 System Reference Manual page 1021

Description of Assigning Items
No. Speed dialing codes appear on the CRT screen.
Type Assigns the toll restriction level for each of the speed dialing codes.
Dial Assigns the actual digits to be dialed including numbers,
a maximum of 32 digits. For hiding the digits, surround them with brackets [ ]. The
dialed digits are not appeared on the display of PITS (if provided) and SMDR call
record.
Name Assigns the Name of System Speed Dialing which is used for KX-T7235 (Digital
PITS with large display) and ATT console. The first character must be 'A' to 'Z' or 'a'
to 'z'.
Conditions
If "System-Operation", Tenant Service is set to "Yes", 200 speed dialing codes
can be split between tenant 1 and tenant 2. To split them, "System-Tenant",
Speed Dialing-System Boundary must be executed.
Function
The following functions appear on the function line of this setting screen.
1 COMMON 2 INDEX
COMMON (SHOW LV, CHG LV, INS, OUS, REMOVE, EXIT) and HRD CPY keys
are available in all setting screens. INDEX key is also available in this screen. The
operation of function keys are described in Section 8-I "Operation of Function Keys".
Only a message is provided here.
INDEX>System Speed Dial No. (001-200)=
F2
:
1 2
3 4 5
3 4 5
10-D-71
, #, P, F, -, [, ] . There is
6 HRD CPY 7 8
6 7 EXIT 8