Panasonic KX-TD500 System Reference Manual page 1266

Hide thumbs Also See for KX-TD500:
Table of Contents

Advertisement

3.00 Fixed Error Messages
DATA ERROR No.
Unacceptable value is assigned.
003
Space exists between items.
004
Some items are left blank.
005
At least one blank should be left among multiple
006
items.
Assigned selection value is not for the item.
007
The number which is set previously in this
008
screen is assigned again.
The number which is set previously in a different
009
screen is assigned.
Device is not installed.
012
Status of the specified device does not accept
013
this command.
Privilege level is lower than specified level.
016
Diagnostic error has been detected when INS
017
command is executed.
Specified service is not executed.
018
Another maintenance device (remote, PITS,
019
system) is in use.
Printer is not connected to the system or the
020
power is off.
Print out is unavailable from Remote.
021
Entered parameters for Item or Index is out of
022
the specified range.
" , / " or " , <CR> " is entered in BT (Batch)
023
programming.
Calendar IC malfunction.
024
Backup device is not connected (only when
027
maintenance device is ATT).
Different version at the time of backup.
029
Probable Cause
11-D-6
Countermeasure
Assign an allowable value.
Remove the space.
Assign all required items, or leave all items
blank.
Leave at least one blank.
Set the assignable value.
Set the number different from the previous
number.
Set the number different from the previous
number.
Assign the installed device.
Change the status of the device to be
acceptable for the command.
Increase the privilege level through the
Change level function.
Verify the related device.
Check specified service.
Wait until another device is finished or let him
finish.
Connect the printer, and make the power on.
Execute print out on-site.
Enter the parameters within the specified
range.
Correct the wrong entry.
Repair calendar IC.
Connect the backup device to SIO # 1 Port.
Match the backup version.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents