Panasonic KX-TD500 System Reference Manual page 968

Description of Assigning Items
Operator 1 (Tenant 2)
Operator 2 (Tenant 2)
Night Service (Tenant 2)
Auto Start Time
: MON. (Day, Night)
: TUE. (Day, Night)
: WED. (Day, Night)
: THU. (Day, Night)
: FRI. (Day, Night)
: SAT. (Day, Night)
: SUN. (Day, Night)
PITS Programming
Password (Tenant 2)
Walking COS Password
(Tenant 2)
Front Extension
(Tenant 2)
Inter-Tenant Calling
Speed Dialing-System
Boundary
Call Park Boundary
Message Waiting
Boundary
Absent message
boundary
Assigns a terminal device for operator 1.
Assigns a terminal device for operator 2.
If this is set to "Manual", an operator must dial the feature number for
"Night Mode Set" for night service or "Night Mode Cancel" for day service.
If this is set to "Auto", the system will switch the day and night modes at
the programmed time each day. An operator,however, can overrride the
auto setting by dialing the feature number for "Night Service Manual
Mode Set". To restore the auto mode, the operator must dial the feature
number for "Night Service Manual Mode Cancel".
Assign automatic change-over time for each day of the week for
Day/Night Service.
Assigns the password for PITS programming. This password is used
when a PITS allowed to program by COS wishes to change system
programming or an attendant console wishes to perform CO verify.
Assigns the password for Walking COS. Walking COS allows a user to
temporarily change the COS of another station to that of the user's
station. This is generally used for making toll calls from a toll restricted
telephone.
Assigns the DN of the extension which is called by the Front Call number
assigned in 10-D-6.00 "Numbering Plan".
If this option is set to "Yes" then calling is allowed between extensions in
different tenants. This option is effective for extension calls only. If this
option is set to "No" then no inter tenant calling is allowed.
Assigns tenant-boundary number for Speed Dialing ( the last number of
the codes that tenant 1 can use).
Assigns tenant-boundary number for Call Park (the last number that
Tenant 1 can use).
Assigns tenant-boundary quantity for Message Waiting (the largest
quantity that tenant 1 can use).
Assigns tenant-boundary number for Absent Message (the last number
that tenant 1 can use).
10-D-18