Special Keys - Panasonic KX-TD500 System Reference Manual

3.04 Control Key Combinations
You can perform specific operations by using the
CTRL key in combination with certain other keys
as follows.
To use a CTRL key combination, hold down the
CTRL key, and press the other key.
CTRL + C : terminates the execution of
entered command. Then allows
you to enter a command again.
CTRL + A : establishes the insert mode.
Pressing CTRL + A again
cancels the insert mode.
CTRL + : moves the cursor to the
beginning of the next word.
CTRL + : moves the cursor to the
beginning of the previous word.
CTRL + DEL : deletes the line.
<Example>
You can abort the testing LED by pressing
CTRL + C .
DIG>LED
***** LED test start
LOOP 2 SRC LED is lighting
***** Abort
DIG>

3.05 Special Keys

The following special keys are used to edit the
command line:
DEL : deletes the character at the current cursor
position. The cursor does not move.
BS : moves the cursor one character left and
deletes the character in that position.
TAB : moves the cursor one space to the right
and adds a space to a line.
: moves the cursor one character right.
: moves the cursor one character left.
: recalls a command which was already
executed by pressing the RETURN key in
reverse order. When the oldest command
is recalled, recalls again from the newest
command.
: recalls a command which was already
executed by pressing the RETURN key in
entered order. When the newest
command is recalled, recalls again from
the oldest command.
14-A-4