Panasonic KX-TD500 System Reference Manual page 1250

58.02 Charge Rate (RAT)
Description
Used to assign the charge rate and denomination of an outgoing CO call.
(Password Level : Two or higher)
Input Format
R A T Mode (SH/AT/BT)
Item Number Input Values
Item
Number
1
Rate
Denomination
2
Supplement
The KX-TD500 informs the charge for calls that is calculated by multiplying the value of "Rate" and a
number of pay-tone that is received from CO through a PCOT card.
For example, when you programmed "Rate" is 0.12 and "Denomination" is "DM", and the KX-TD500
received a pay-tone 10 times from CO line, the charge for the call is shown "1.2 DM" on the PITS of
Charge Manager and SMDR.
Conditions
•The KX-TD500 can display a charge for calls maximun 8 digits (or 7 digits when included a decimal
point) on a PITS and SMDR. So, if the value exceeded this limit, the KX-TD500 display only the last 7 or
8 figures of a charge for calls.
•The "Rate" item can also be assigned by an extension user in the PITS station programming mode.
Refer to Section 13-C-9.11 "Setting Charge Rate".
Item Number
Assigning Items
11-C-124
↵
CR
Input Value
Up to eight digits numeric characters
including "." (decimal point) can be entered.
Up to two characters or a sign.
[Note]
Enclose the input value with double
quotation marks.