Panasonic KX-TD500 System Reference Manual page 1245

57.04 Line Hunting Sequence(LHS)
Description
Used to change the hunting sequence of idle lines on a tie trunk group basis.
By default, idle tie lines are seized from the smallest to the largest physical number in order at all
locations when a tie call is initiated by a user. This may cause a frequently busy situation between a
certain two locations .
In this case, we recommend to change the hunting sequence at one location from "1"(smallest
largest) to"2"(largest
(Password Level : Two or higher)
Input Format
L H S
Mode (SH/AT/BT)
Index Number
Index Number
01 to 48
Index Number Input Values
Assigning Item
Line Hunting Sequence
smallest).
Index Number
X(1 or 2)
1: From the smallest to the largest physical number of tie lines
2: From the largest to the smallest physical number of tie lines
(Default = 1)
11-C-119
↵
CR
Explanation
Trunk Group Number
Input Value