Panasonic KX-TD500 System Reference Manual page 844

2.00 Installation Screen
---------------------------------------------------------------------------------------
<< Customer & Installation Data >>
<< System Password >>
---------------------------------------------------------------------------------------
Comments:Customer data is set default
1 2
Summary
A screen for setting various data relating to the
installation of the system, and for setting system
passwords.
This screen does not appear when administration
data has already been assigned in on-line mode
or if you start up the system when CPU Operation
Switch (Mode) is set to 0 to 4 and 8 to 9. Refer to
Section 2-F-2.00 "CPU Rotary-Switch Features"
Assigning Items
<Customer & Installation Data>
Customer Name
Location
Phone No.
Modem No.
Customer Contact
Date of Installation
Unit ID
Installers Name
Programmers Name
*** Panasonic Digital PBX Installation ***
Please set the following initial data
Customer Name :
Location :
Phone No. :
Modem No. :
Customer Contact :
Date of Installation :
Unit ID :
Installers Name :
Programmers Name :
Protection Level 1 :
Protection Level 2 :
Protection Level 3 :
Protection Level 4 :
3 4
Default
Up to 32 letters, numbers or marks
Up to 64 letters, numbers or marks
Up to 16 letters, numbers or marks
Up to 16 letters, numbers or marks
blank
Up to 32 letters, numbers or marks
Up to 16 letters, numbers or marks
Up to 8 letters, numbers or marks
Up to 32 letters, numbers or marks
Up to 32 letters, numbers or marks
KME Co.,Ltd.
1-62 4-cyome Minoshima Hakata-ku
Fukuoka 812 Japan
1995/11/25
5KCAC001
Tony.H
Tony.H
LVL1
LVL2
LVL3
LVL4
5 6 HRD CPY 7
for details.
To advance to the next screen without any entry,
press the PF2 key.
For storing the entered parameters, press the
PF2 or the PF4 key. For storing operation, refer
to Section 8-H "Key Functions".
Selection of Value
8-B-2
8
Continued