Panasonic KX-TD500 System Reference Manual page 1138

Item
Assigning Items
Number
18 PITS Programming Password
19
Walking COS Password
20
Front Extension 1 DN
21
Front Extension 2 DN
22
Front Extension 3 DN
23
Front Extension 4 DN
24
Inter-Tenant Calling
25
Speed Dialing-System
Boundary
26
Call Park Boundary
27
Message Waiting Boundary
28
Absent Message Boundary
The item numbers 24 through 28 are for tenant 2
only when tenant service is employed.
Conditions
Index Number 2 does not appear if "Operation (OPR)" Tenant Service is set to "N".
Item
Number
01, 02 Operator 1/2
four numeric digits
four numeric digits
0 : none
DNXXXX (XXXX: three or four numeric digits) : Front
Y : Inter-Tenant calling is available
N : Inter-Tenant calling is unavailable
000 to 200 : boundary number
000 : all for tenant 2
200 : all for tenant 1
00 to 20 : boundary number
00 : all for tenant 2
20 : all for tenant 1
000 to 500 : boundary number
000 : all for tenant 2
500 : all for tenant 1
06 to 16 : boundary number
06 : all for tenant 2
16 : all for tenant 1
This system can accommodate up to two Attendant Consoles. When
Tenant Service is available and if two Attendant Consoles are assigned to
tenant 1, no Attendant Console can be assigned to tenant 2.
If only one Attendant Console is accommodated, it must be assigned only
to Operator 1.
11-C-12
Input Value
Extension Number
: clearing function is effective
for the item
Continued
CLR