Panasonic KX-TD500 System Reference Manual page 1235

3. Repeat Step 2 until you assign all T-1/E-1 cards installed.
4. To store the new assignment, enter '$EOD' on the next line of the last parameter you entered. (If
you filled all the six items, the display returns to the first item.)
; PRG> CLP AT 1
; 1 : Priority 1 .................. 101
; INPUT >> 201
; 2 : Priority 2 .................. 105
; INPUT >> 205
•
•
•
; 6 : Priority : 6 ............... 209
; INPUT >> 309
; 1 : Priority : 1 ............... 101
INPUT >> $ EOD
The new assignment is stored to the system, and the programming prompt (PRG >) appears
again.
To finish the programming
At the programming prompt (PRG >), enter 'EXIT'.
; PRG> EXIT
The screen displays the initial prompt ( > ) of the Dumb programming mode as follows:
; PRG> EXIT
; >
To return to the VT programming mode
At initial prompt (>), press:
CTRL and
The screen displays the Main Menu of the VT programming mode.
Conditions
When more than two T-1/E-1 cards are installed in the system, each of them should be registered by
this command.
( ↵ )
( ↵ )
V keys simultaneously.
11-C-109