Panasonic KX-TD500 System Reference Manual page 891

7.00 INDEX
Description
Enables you to enter the desired screen
immediately without using the NEXT or PREV
key.
Operation
<Example>
Entering the Class of Service No.=32 screen.
The current screen is Class of Service (COS)
No.=01
System-Class of Service
Class of Service (COS) No. = 01 (1/3)
1 COMMON 2 INDEX 3 COPY 4 READ
1. Press the F2 key.
INDEX>Class of Service No. (01-32)=
1 2 3 4
2. Enter COS number 32 that you want to enter.
INDEX>Class of Service No. (01-32)=32
1 2 3 4
3. Press the RETURN key.
System Class of Service
Class of Service (COS) No. = 32 (1/3)
1 COMMON 2 INDEX 3 COPY 4 READ
• COS No.=32 screen appears, and the
function mode is finished automatically.
5 6 HRDCPY 7 8
F2
5 6 7 EXIT 8
3 2
5 6 7 EXIT 8
RETURN
5 6 HRDCPY 7 8
Operation Chart
Press INDEX key F 2
<Function mode>
Enter the number of the
setting screen, and press
RETURN key.
After showing the desired
screen, function mode ends
automatically.
Condition
If "INDEX" operation cannot be executed, one of
the following error messages appears on the
screen.
A type of error message depends on the situation.
*****Error : Illegal parameter
*****Error : Not installed
*****Error : Please save data
*****Error : Parameter is empty
For details about the error messages, refer to
Section 10-K "Error Message Tables".
Reference
The INDEX function is available for the screen
listed below. For the input values, refer to
Section 10 "System Programming (VT)".
• System-Class of Service (1/3) (2/3) (3/3)
• System-Numbering Plan (1/11) to (11/11)
• System-Speed Dialing-System
• Group-Trunk Group (1/3) (2/3) (3/3)
• Trunk-CO Line
• Extension-Station (1/4) (2/4) (3/4) (4/4)
• Extension-DSS Console (1/3) (2/3) (3/3)
8-J-11