Panasonic KX-TD500 System Reference Manual page 484

Placing a call on Consultation Hold on two DN
buttons
1. Press the TRANSFER or CONF
button.
• The DN button in use is still lit
or
in green, you hear confirmation
tone 2 then dial tone 1, 3, or 4.
• The call is placed on
Consultation Hold.
2. Press another DN or CO button.
• The pressed button lights in
green, you hear dial tone 1, 3,
or 4.
You can call another party from
the selected DN or CO button.
• The DN button where a call
has been held changes from
being lit in green to flashing in
green 120 wink.
Retrieving a call on Consultation Hold (1)
You placed a call on Consultation hold and press
another DN or CO button.
1. Replace the handset or press the
SP-PHONE button.
• The indicator light on the
pressed DN or CO button goes
out.
• Consultation Hold Recall starts.
2. Lift the handset or press the SP-
PHONE button.
• A call on Consultation Hold is
retrieved. You can talk to the
party.
• The DN button changes from
flashing in 120 wink to being lit
in green.
Retrieving a call on Consultation Hold (2)
You have placed a call on Consultation Hold and
are talking on another DN or CO button.
1. Press the TRANSFER button.
• A call on Consultation Hold is
• The DN or CO button changes
• Another party in conversation
Retrieving a call on Consultation Hold (3)
You have placed a call on Consultation Hold and
are talking on another DN or CO button.
1. Press the DN or CO button
where the call has been held and
flashing in green 120 wink.
• A call on Consultation Hold is
• The DN or CO button changes
• Another call is disconnected
4-E-4
retrieved and you can talk to
the retrieved party.
from flashing in green 120 wink
to being lit in green.
is placed on Consultation Hold
and the DN button changes
from being lit in green to
flashing in green 120 wink.
retrieved and you can talk to
the retrieved party.
from flashing in green 120 wink
to being lit in green.
and the green indicator light on
the button goes out.