Panasonic KX-TD500 System Reference Manual page 1234

56.03 Master Clock Priority (CLP)
Description
CLP command is used to assign the sequence in which TSW clock is provided when multiple T-1/E-1
cards are installed.
(Password Level : Two or higher)
Input Format
P
C L Mode (SH/AT/BT)
Index Number
None
Item Number Input Values
Item
Assigning Items
Number
1 to 8 Priority 1 to 8
Note:
You have to assign this item even if only one T-1/E-1 card is installed.
Programming
To enter the Dumb Programming mode
1. Press CTRL key and V key simultaneously when Main Menu screen is displayed at VT
programming mode.
2. At the Dumb programming initial prompt (; > ), enter 'PRG'.
( ↵ )
; > PRG
The screen displays the programming prompt (PRG>) as follows:
; PRG>
To change the default setting
1. At the programming prompt (PRG>), enter 'CLP AT 1'.
; PRG> CLP AT 1
The screen displays the first value of the sequence, and input prompt (INPUT >>) as follows:
; 1 : Priority 1 ................... 101
; INPUT >>
2. Enter the new value (e.g. 201).
; INPUT >> 201
The screen displays the next item and the input prompt (INPUT >>) as follows:
; 2 : Priority 2 .................. 105
; INPUT >>
Item Number
/E-1 card physical slot number
T-1
(three digits number)
( ↵ )
( ↵ )
11-C-108
↵
CR
Input Value