64.00 Answer Signal Wait Time (AWT)
Description
Disconnects an outside call made by an extension user if the call is not answered by the destination party
before a pre-selected time expires. This setting can be programmed on a trunk group basis.
(Password Level: Two or higher)
Input Format
A W
T
Mode (SH/AT/BT)
Index Number
Index Number
01 to 48
Item Number Input Values
Assigning Items
No Answer Waiting Time
Conditions
• This parameter is active when the channel type is "DR-02" and the dial mode of the CO line is "MFC-R2"
of the E-1 card. Refer to section "56.01 Channel Assignment (CHA)" for the channel type and section
20.00 "CO Line (COL)" for the dial mode.
• This parameter is active when the trunk group type is not "DID".
• The system regards the dial as complete after receiving the dials defined by this command. Then it
determines the destination extensions.
↵
( Index Number )
CR
Trunk Group Number
X (0 to 4)
0: No limit
1: 1 minute
2: 2 minutes
3: 3 minutes
4: 4 minutes
(Default: 0)
11-C-132
Explanation
Input Value