9.07 Checking the Charge Meter–
All CO Lines
Used to check the total charge of all CO lines.
Operation
1. Set Charge Management
Mode.
2. Enter "3".
• To alternate between the rate
and the meter, press SELECT.
To continue the Charge
Management:
3. Press PREV.
To finish the operation:
4. Press END.
Display/Indicator/Tone
•
Charge Meter
<Example>
Sum: 00450
Sum: 00099.99DM
Charge Meter
•
SYS–PGM No?
Initial Display of PITS Station
Programming Mode
13-C-44
Comment/Note
• Refer to Section 13-C-9.02
"Entering Charge
Management Mode".
• The value of rate is valid only
the last 7 or 8 figures. Refer to
Section 11-C-58.02 "Charge
Rate(RAT)" for further
information.