Panasonic KX-TD500 System Reference Manual page 1315

Operation
3. To change the preset
feature, dial the program
number corresponding to the
desired feature.
• To assign DSS (DN) feature,
1) Dial "1".
2) Dial a directory number
(three or four digits).
• To assign Voice Mail
Transfer feature, dial "2".
• To assign One Touch Dialing
feature,
1) Dial "3",
Result
1) The following message
appears on the display.
DSS(DN):
2) The dialed number appears
on the display.
<Example>
DSS(DN):100
The following message appears
on the display:
VM Transfer
1) No message appears on the
display:
2) The following message
appears on the display:
<Example 1> when dialing a
telephone number:
1 2 3 4 5 6
13-C-3
Comment/Note
<Example>
Message Waiting
(Message Waiting)
<Example>
CO:T10101
(Single CO)
<Example>
Trunk Group:11
(Group CO)
• If no feature is assigned to the
DN button, the following
message appears on the
display :
Not Stored
• If the dialed number does not
exist as a directory number,
alarm tone sounds.
• If you want to erase an entry,
press the CLEAR button
and enter the correct number.
• Refer to Section 3-F-10.04
"Voice Mail Transfer Key" for
further information .
• Refer to Section 4-C-4.01
"One Touch Dialing" for further
information .
• Up to 16 digits can be entered.
Continued
Continued