Panasonic KX-TD500 System Reference Manual page 1039

Description of Assigning Items
UCD Group (1 to 32)
Tenant
PAG Group (1 to 8)
Tenant
Conditions
This screen must be programmed before programming "Group-Call Pickup Group" screen.
However, this screen does not appear if "System-Operation", Tenant Service is set to "No".
The tenant of the UCD group or paging group can be changed only when all the extensions
belonging to call pickup group are not exist. If any extension exists, it is impossible to
change. This restriction is only for On-line programming, not for Off-line programming.
Function
The following functions appear on the function line of this setting screen.
1 COMMON 2
COMMON (SHOW LV, CHG LV, INS, OUS, REMOVE, EXIT) and HRD CPY keys
are available in this setting screen.
For operation, refer to Section 8-I "Operation of Function Keys".
Assigns UCD groups from 01 to 32 to tenant 1 or 2.
Assigns paging groups from 1 to 8 to tenant 1 or 2.
3 4 5 6 HRD CPY 7
10-E-15
8