Panasonic KX-TD500 System Reference Manual page 1240

56.08 E-1 Signaling Option (ESO)
Description
Used to activate the "Charge Management" feature. If this feature is activated, the KX-TD500 displays the
phone charge on the display of the PITS by selecting the Meter Pulse sent from the Cenral Office.
(Password Level : Two or higher)
Input Format
E S O Mode (SH/AT/BT)
Item Number Input Values
Item
Assigning Items
Number
Meter Pulse Detect Mode
1
Meter Pulse Detect Position
2
Meter Pulse Length
3
Dial Pulse Control Position
4
Clear Back Signal Control
5
Position
Conditions
The ESO command is valid for DR2 channel trunks only.
CR
( Item Number )
XX (0 to 2)
0: No detection
1: Outgoing CO calls only
2: Both Incoming and Outgoing CO calls
(Default: 1)
X (A to B)
A: Detect position is A-Bit
B: Detect position is B-Bit
(Default: B)
XX (01 to 60)
01: 8msec
02: 16msec (N*8 msec)
60: 480msec
(Default: 16)
X (A to B)
A: Dial Pulse is controlled by A-Bit
B: Dial Pulse is controlled by B-Bit
(Default: B)
X (A to B)
A: Clear back is controlled by A-Bit
B: Clear back is controlled by B-Bit
(Default: B)
11-C-114
↵
Input Value