Panasonic KX-TD500 System Reference Manual page 1163

20.00 CO Line (COL)
Description
To assign parameters on a CO line basis. DATA ERROR
appears on the entry of parameters if no CO trunk card is
assigned in the Slot Assignment (SLA) programming.
(Password level : Three or higher)
Input Format
C O L Mode
Index Number
Index Number
Five digit numbers (10101 to 31416)
Item Number Input Values
Item
Assigning Items
Number
01 Trunk Group
02 Trunk Name
03 Direct Termination
04 Night Answer Point
(Type : No.)
05 Dial Mode
06 DTMF Duration Time
Pulse Speed
07
(
Index Number Item Number
01 to 48 : trunk group number
Maximum 10 ASCII characters
(Enclose the name with double quotes ".)
DN XXXX (XXXX : three or four digits) : extension number
0 : none
(Not assignable when the Trunk Group type is DID, PVL or
TIE, or Incoming Mode (Day) is set to any mode
except DIL 1:1)
DN XXXX (XXXX : three or four digits) : extension number
U1 : universal night answer 1
U2 : universal night answer 2
0 : none
R : Remote Administration
N : Night Answer Group Extensions
(Not assignable in case of DID, TIE, or PVL, or outgoing
only)
1 : DTMF mode
2 : Pulse mode
3 : MFC-R2 mode
(Not assignable when the Trunk Group type is DID)
1 : 80 milliseconds
2 : 160 milliseconds
(Not assignable when the Trunk Group type is DID, or the
dial type is pulse)
1 : low (10 pps)
2 : high (20 pps)
(Not assignable when the Trunk Group type is DID, or the
dial type is DTMF)
11-C-37
)
CR
Explanation
Physical number of the CO line
Input Value CLR
Continued