Panasonic KX-TD500 System Reference Manual page 1285

3.00 Storing Speed Dialing-System
This is used to Store telephone numbers for
speed dialing which all the extension users in the
system can use to call outside parties. Up to 200
speed dialing codes can be stored.
Operation
1. Set PITS system
programming mode.
(See 12 - C - 1.01)
2. Dial "0 1". (program number)
3. Dial the appropriate speed
dialing code: three digits (001
to 200).
4. Dial the toll restriction level:
two digits (00 to 16).
For further information about Speed Dialing
feature, refer to Section 4-C-4.02 ''Speed Dialing-
System''.
Result
• The message below appears on
the display:
SYS-PGM No?
• The MEMORY button indicator
lights in red.
• Speed dialing code entry screen
appears on the display:
Speed No?
• The MEMORY button indicator
light goes out.
• Current entry for the selected
code appears on the display:
<Example>
100: 01, 9555-1212
100 : Speed dialing code
01 : Toll restriction level
9 : Feature number for
selecting the CO line
555-1212 : Telephone number
• If nothing is stored:
100: Not Stored
• Dialed digits appear on the
display:
<Example>
100: 16,
12-C-7
Comment/Note
• If the NEXT button is
pressed, the number for the
speed dialing code ''001''
appears.
• After the current entry is
displayed, pressing the
PREV button displays the
number of the previous
speed dialing code.
• When Tenant Service is
employed, you can store the
speed dialing codes of your
tenant.
• When more than 10 digits are
stored, it can be confirmed by
scrolling the display with the
or button.
• After dialed number is
displayed, '','' appears
automatically.
Continued