Panasonic KX-TD500 System Reference Manual page 501

2.00 Call Forwarding (FWD)
2.01 Call Forwarding-All Calls
Description
Call Forwarding-All Calls allows extension users
who are away from their phones to receive
incoming calls (both extension and CO) at
another extension.
Incoming calls can be forwarded to extension
users, Voice Mail ports, or operators (Attendant
Console or Extension).
"FDN for General Operator Call" can be used to
assign operators as the destination of Call
Forwarding.
Refer to Section 10-D-1.01 "Operation (1/3)" for
further information.
The following incoming calls do not receive Call
Forwarding treatment.
• A call from doorphone
• A call appearing on PCO button
• A call routed via DIL 1: N feature
• A call directed to a UCD group
To execute Call Forwarding-All Calls, assign
"System-Class of Service", Call Forwarding/Do
Not Disturb to "Yes".
To set or cancel this function, the following two
methods are available:
<1> By pressing the FWD/DND button.
<2> By dialing the feature number for
"Call Forwarding-All Calls Set" and
"Call Forwarding-Do Not Disturb Cancel".
Programming
System Programming
"System-Class of Service (1/3)",
Call Forwarding/Do Not
Disturb
"System-Numbering Plan (4/11)",
Call Forwarding-All Call Set
"System-Numbering Plan (5/11)",
Call Forwarding/Do Not
Disturb Cancel
Reference
VT Dumb
10-D-4.01 11-C-7.00
10-D-6.04 11-C-11.00
10-D-6.05 11-C-11.00
4-F-9
Conditions
To set or cancel this function, use the PDN
button.
An extension user may have only one type of
Call Forwarding/Do Not Disturb feature in effect
at any time. If a second type is assigned, the
previously assigned type is canceled.
Call Forwarding-All Calls feature functions even if
the extension is in the PITS programming mode.
If the extension to which calls are to be
forwarded itself is in a call forward mode, a call is
not forwarded furthermore. The call rings at the
first forwarded extension. In case of an outside
call, if not answered in a specified time period,
the call will be routed to another destination, if
available, based on the "Intercept Routing-No
Answer" feature.
Calls from any VM extension will not be
forwarded, if forwarding destination is another
VM extension.
An extension user is rejected with reorder tone if
he or she attempts:
• In case of the parameter "Tenant Service" is
employed, the user cannot set the destination
to an extension or an Attendant Console which
belongs to another tenant.
• To call another extension that presets its
destination to the user's extension.
The Operators (Attendant Console or Extension)
can cancel the Call Forwarding/Do Not Disturb
feature assigned to the extension users. Refer to
Section 4-I-11.00 "Remote Station Feature
Control".