Panasonic KX-TD500 System Reference Manual page 618

Operations
Executing Call Park-Station
1. Press the switchhook for
approximately one half second
and release it.
• The current call is placed on
Consultation Hold. You hear
confirmation tone 2 and then
dial tone 1, 3, or 4.
2. Dial the feature number for "Call
Park-Station" (Default : *48).
• When you succeed in Call
Park-Station, you hear
confirmation tone 2 and then
dial tone 1, 3, or 4.
• When you cannot park a call
(another call is already
parked), you hear busy tone 1
or 2.
• To talk to the party placed on
Consultation Hold again while
hearing busy tone 1 or 2, follow
the same procedures as
retrieving Consultation Hold.
Refer to Section 5-C-2.00
"Consultation Hold".
3. Replace the handset.
Retrieving Call Park-Station
1. Lift the handset.
2. Dial the feature number for "Call
Park Retrieve-Station" (Default :
#48).
3. Dial the directory number of the
parking extension : three or four
digits.
• When you succeed in retrieving
• If no call is parked at the
5-C-6
Call Park-Station, you hear
confirmation tone 2. Then start
conversation with the retrieved
party.
extension, you hear reorder
tone.