Panasonic KX-TD500 System Reference Manual page 627

2.00 Call Forwarding (FWD)
2.01 Call Forwarding-All Calls
Description
Call Forwarding-All Calls allows extension users
who are away from their phones to receive
incoming calls (both extension and CO) to them
at another extension.
Incoming calls can be forwarded either to
extension users, Voice Mail port, or operators
(Attendant Console or Extension).
"FDN for General Operator Call" can be used to
assign operators as the destination of Call
Forwarding.
Refer to Section 10-D-1.01 "Operation (1/3)" for
further information.
The following incoming calls do not receive Call
Forwarding treatment.
• A call from doorphone
• A call routed via DIL 1: N feature
• A call directed to a UCD group
To execute Call Forwarding-All Calls, assign
"System-Class of Service", Call Forwarding/Do
Not Disturb" to "Yes".
To set and cancel this function, dial the feature
number for "Call Forwarding-All Calls Set" and
"Call Forwarding-Do Not Disturb Cancel".
Programming
System Programming
"System-Class of Service (1/3)",
Call Forwarding/Do Not
Disturb
"System-Numbering Plan (4/11)",
Call Forwarding-All Call Set
"System-Numbering Plan (5/11)",
Call Forwarding/Do Not
Disturb Cancel
Reference
VT Dumb
10-D-4.01 11-C-7.00
10-D-6.04 11-C-11.00
10-D-6.05 11-C-11.00
5-D-9
Conditions
An extension user may have only one type of
Call Forwarding/Do Not Disturb feature in effect
at any time. If a second type is assigned, the
previously assigned type is canceled.
If the extension to which calls are to be
forwarded itself is in a call forward mode, a call is
not forwarded furthermore. The call rings at the
first forwarded extension. In case of an outside
call, if not answered in a specified time period,
the call will be routed to another destination, if
available, based on the "Intercept Routing-No
Answer" feature.
Calls from any VM extension will not be
forwarded, if forwarding destination is another
VM extension.
The following attempt will be rejected with
reorder tone.
• In case of the parameter "Tenant Service" is
employed, the user cannot set the destination
to an extension or an Attendant Console which
belongs to another tenant.
• The extension user cannot call another
extension that presets its destination to the
user's extension.
The Operators (Attendant Console or Extension)
can cancel the Call Forwarding/Do Not Disturb
feature assigned to the extension users. Refer to
Section 6-J-5.00 "Remote Station Feature
Control".