Panasonic KX-TD500 System Reference Manual page 1153

12.00 Communication Interface
(COM)
Description
To set parameters for the RS-232C and Modem
(Modulator and Demodulator) ports.
(Password level: Two or higher)
Input Format
Mode
O M
C
Index Number
Index Number
Item Number Input Values
Item
Assigning Items
Number
1
NL-code
Baud Rate
2
Word Length
3
Parity
4
Stop Bit
5
Conditions
It is possible to change assigning items in "Communication Interface (COM)" while
on-site administration or remote administration is performed or SMDR is being
printed out. New setting becomes effective when those operation modes are
finished.
For further description of assigning items, refer to Section 10-D-7.00
"Communication Interface".
( )
Index Number
1
2
3
1 : CR + LF
2 : CR
110/150/300/600/1200/2400/4800/9600 : for SIO
300/1200 : for Remote
6 : 6 bits (for Remote only)
7 : 7 bits
8 : 8 bits
1 : none
2 : mark (for SIO only)
3 : space (for SIO only)
4 : even
5 : odd
1 : 1 bit
2 : 1.5 bits (for Remote only)
3 : 2 bits
( )
CR
Item Number
SIO # 1 (terminal)
SIO # 2 (SMDR)
Remote
Input Value
11-C-27
Explanation