Panasonic KX-TD500 System Reference Manual page 487

Operation
Parking a call during a conversation on the DN or
CO button
1. Press the TRANSFER button.
• The other party is placed on
Consultation Hold. You hear
confirmation tone 2 then dial
tone 1, 3, or 4.
2. Dial the feature number for "Call
Park-System" (Default : *47), or
press the "Call Park-System"
button which is assigned to a
CO/PF button.
3. Dial the parking area number in
two digits : 01 to 20.
• When you succeed in Call
Park-System, you hear
confirmation tone 2 then dial
tone 1, 3, or 4.
• If your PITS has a display, it
shows:
Call Prked at xx
• If a call cannot be parked on
the selected parking area,
(another call is already parked
in the parking area), you hear
busy tone 1 or 2.
• If your PITS has a display, it
shows:
Parked at xx N/A
• In this case, dialing another
parking area number (01 to 20)
allows you to try a new call
park destination.
• To talk to the party placed on
Consultation Hold again while
hearing busy tone 1 or 2, follow
the same procedure as
retrieving Consultation Hold.
Refer to Section 4-E-3.00
"Consultation Hold".
parking area
number (1 to 20)
parking area
number (01 to 20)
4-E-7
4. Replace the handset or press
SP-PHONE button.
(Supplement)
In step 1, when you are talking on the CO button,
pressing the Call Park-System button is ignored if
there is no idle DN button.
Retrieving a call parked in the system parking
area
1. Lift the handset or press the SP-
PHONE button.
2. Dial the feature number for "Call
Park Retrieve-System" (Default :
#47), or press the "Call Park-
System" button which is
assigned to a CO/PF button.
3. Dial the parking area number :
01 to 20.
• When you succeed in retrieving
the parked call, you hear
confirmation tone 2. Then talk
to the other party.
• If no call is parked on the
selected parking area, you
hear reorder tone.
• If your PITS has a display, it
shows:
No Hold Call