Rear Wheel - Honda 2010 CBX 250 Workshop Manual

CBX250

REAR WHEEL

DISMANTLING
Place the engine on an easel or adequate support and lift
the rear wheel of the soil.
Remove the bolts and the cover of the drive chain swing arm.
Remove the adjustment nut rear brake, the stem the
brake, the spring and the union.
Remove the nut of the rear axle and the plate of the axle.
Loosen completely the nuts and bolts of adjustment of
the drive chain.
Move the rear wheel totally forward.
Remove the chain of the crown of transmission.
From the left side, remove and rear axle and the wheel.
Remove the adjusters in the chain transmission.
INSPECTION
Rear Axle
Support the axle on two blocks in V and measure the
twist, using an indicator of quadrant.
Consider the half of the total reading of the indicator
of quadrant as the real twist.
Service Limit
Wheel
Support for the wheel in a support giratório and veri-
fy the eccentricity of the rim.
Turn the wheel slowly and carry out the reading of
the eccentricity, using an indicator of quadrant.
Consider the half of the total reading of the indicator
of quadrant as eccentricity real.
Radial
Service
Limit
Axial
0,20 mm
2,0 mm
2,0 mm
REAR WHEEL/BRAKE/SUSPENSION
BOLTS
BOLT rear
axle
RESORTE
STEM FROM
THE brake
JOIN
ADJUSTMENT NUT
PLATE OF THE AXLE
NUT OF THE
AXLE
ADJUSTMENT NUT/
AGAINST