Honda 2010 CBX 250 Workshop Manual page 95

CYLINDER HEAD/VALVES
SPECIFICATIONS
Compression of the cylinder
Twist of the cylinder head
Camshaft Height of the lobes
Eccentricity
D.E. of the stump
D.I. Of the cylinder head
Slack oil
Valves and Valve slack
guides of
the valves
D.E. The offspring of the valve
D.I. The guide to the valve
Slack between the stem and the
valve guide
Width of the seat of the valve
Valve springs Free length
The actuator D.E. The actuating the valve
of the valves
D.I. The accommodation of actuator
TORQUE VALUES
Bolt the door of the cylinder head
Bolt the support of Camshaft
Nut of the cylinder head
Bolt of superior connection of the tube of
oil from the cylinder head
7-2
Item
Interno
External ADM/ESC
12 N.m (1,2 kg.m)
12 N.m (1,2 kg.m)
45 N.m (4,5 kg.m)
12 N.m (1,2 kg.m)
Value
1.128 kPa (11,5 kgf/cm
163,6 psi) a 400 rpm
ADM 37,00 – 37,24
ESC 37,03 – 37,27
24,959 – 24,980
25,000 – 25,021
0,020 – 0,062
ADM
ESC
ADM 4,975 – 4,990
ESC 4,955 – 4,970
ADM/ESC 5,000 – 5,012
ADM 0,010 – 0,037
ESC 0,030 – 0,057
ADM/ESC 1,0 – 1,2
ADM/ESC
ADM/ESC 25,978 – 25,993
ADM/ESC 26,010 – 26,026
Apply oil to the thread and to the surface of settlement
Apply oil to the thread and to the surface of settlement
CBX250
Unit: mm
Service Limit
2 ,
—
— 0,10
36,94
36,97
0,02 0,10
—
—
0,10
0,12 —
0,15 —
4,96
4,94
5,03
0,07
0,09
2,0
33,77 32,36
36,64 34,84
25,97
26,06