Replacement Of The Bearing Of The Wheel - Honda 2010 CBX 250 Workshop Manual

CBX250
Remove the dust on the right side of the body of the wheel.
Remove the bolts and fixing the brake disc.
NOTE
Check the brake disc with regard to twist (refer
to page 15-6).

Replacement of the BEARING OF THE WHEEL

Install the head extractor of bearings in the bearing.
From the opposite side, install the axle extractor and
remove the bearing of the body of the wheel. Remove
the sleeve separator and use the special tools to re-
move the other bearing.
Tools:
Head extractor of bearing 17 mm
Axle extractor of bearing
ASSEMBLY
i
Never reuse the bearings. To remove a ball, always re-
place it with a new one.
BEARING ON THE RIGHT
NUEVO
SIDE OF THE WHEEL
BRAKE DISK
FRONT WHEEL/SUSPENSION/STEERING
BOLT
07746-0050500
07746-0050100
HEAD EXTRACTOR OF BEARING
BEARING ON THE LEFT
NUEVO
SIDE OF THE WHEEL
DUST COVER
GRASA
NUEVO
BRAKE DISK
AXLE EXTRACTOR OF BEARING
NUEVO
DUST COVER
RETAINER
GEAR
SLEEVE Separator
GRASA
GRASA