Arm Of Actuating The Clutch; Clutch Dismantling - Honda 2010 CBX 250 Workshop Manual

CLUTCH/GEAR SELECTOR

ARM OF ACTUATING THE CLUTCH

Inspection
Remove the arm of actuating the clutch and spring for the
return of the lid right side of the casing of the engine.
Check the spindle arm of actuating the clutch with regard to
wear or damage.
Check the spring of return with regard to fatigue or damage.
Check the dust and the hub with regard to wear or
damage. Check if they are fixed in the right way.
Replace the defective parts.
CLUTCH
DISMANTLING
Remove the cover right side of the casing of the
engine (page 9-3). Remove the bearing of the
clutch. Loosen the bolts springs of the clutch in
sequence, mixed in several steps. Remove the
bolts and springs. Remove the plate operated.
Unlock the nut of locks of the body of clutch.
i
Be careful not to damage the thread of the main axle.
Set the body of clutch using the special tool. Then, Loosen
the nut of locks.
Special tool:
Support of the body of clutch
Remove and discard the nut of locks.
9-4
07JMB-MN50301
RETURN ACTUATING ARM OF THE
SPRING CLUTCH
TOP RIGHT SIDE OF THE CASING OF THE ENGINE
INSERT
BOLT/SPRING
OPERATING PLATE
SUPPORT OF THE
BODY OF CLUTCH
CBX250
DUST COVER
CLUTCH BEARING
LOCK OF NUTS