Rear Wheel/Brake/Suspension Service Information; Rear Wheel/Brake/Suspension Specifications - Honda 2010 CBX 250 Workshop Manual

CBX250
SERVICE INFORMATION
INVESTIGATION OF FAULTS
BACK WHEEL
BACK BRAKE
SERVICE INFORMATION
GENERAL INSTRUCTIONS
d
•A drum or brake shoes contaminated reduce the performance of braking. Discard the brake pads contaminated
and clean the drum with a degreasing agent of brake of high quality. •The conduct of the motorcycle with tires or
lightning damaged can adversely affect the operation and security.
i
When you use a lever to extract tires, always use a protector of tires, to avoid damaging them.
•The damper contains nitrogen under high pressure. Keep it away from flames and heat. •Before dismissing the
damper, release the nitrogen (page 14-13). •Damper contains nitrogen under high pressure. Do not attempt dismantle.
•To make services of repair and maintenance in the rear wheel, swing arm or the absorber, support the motorcycle in
easel or adequate support. •Refer to Section 15 to obtain information to respect the brake system. •Use nuts and bolts
of replacement original Honda in all the joints and fixing points of the suspension.
SPECIFICATIONS
Minimum Depth of tread depth
Air pressure (cold) Solamente pilot
Pilot y pasajero
Twist of the axle
Twist of the axle Radial
rim of the wheel
Axial
Counterweight to the balance of the wheel
Chain of Size/links
transmission
Slack
Brake Free Play of brake pedal
D. I. the drum rear brake
Thickness of the lining of the zapata rear brake
14-1
14-2
14-3
14-10
Item
14.
SHOCKS
SWING ARM
BRAKE PEDAL
Value
—
225 kPa (2,25 kgf/cm
250 kPa (2,50 kgf/cm
—
—
—
—
520 VD – 106
15 – 25
20 – 30
130,0 – 130,2
—
REAR WHEEL/
BRAKE/SUSPENSION
14-12
14-14
14-19
Unit: mm
Service Limit
Until the wear
indicator
2 , 33 psi) —
2 , 36 psi) —
0,20
2,0
2,0
60 g Max.
—
—
—
131,0
Until the wear
indicator