Hydraulic Brake Troubleshooting; Lever Brake Too Soft Or Elastic; Lever Of Brake Too Hard; Brake Seizing Or Motorcycle Diverting To One Side - Honda 2010 CBX 250 Workshop Manual

CBX250
HYDRAULIC BRAKE
SPECIAL TOOL
Pliers for rings of pressure 07914-3230001
INVESTIGATION OF FAULTS

Lever brake too soft or elastic

•Presence of air in the hydraulic system •Leakage of fluid in
the hydraulic system •Pads/disc brake contaminated
•Stamps piston calliper worn •Checkpoints of piston master
cylinder worn •Pills/disc brake •worn Clamp •contaminated
The clamp not slips correctly •low level of fluid brake Ducts
•passenger the fluid obstructed •brake disc deformed/leaf
•Piston calliper brake stuck/worn •Piston master cylinder
stuck/worn •master cylinder contaminated •Lever brake bent

Lever of brake too hard•

Hydraulic System obstructed/restricted •Piston calliper
brake stuck/worn •clamp not slips correctly •Channels of
passage of the fluid obstructed •Stamps piston calliper
worn •Piston master cylinder stuck/worn •Lever brake bent

Brake seizing or motorcycle diverting to one side

•Pills/brake disc contaminated •Wheel poorly aligned
•Connecting the hose brake obstructed/restricted •brake disc
leaf/deformed •clamp not correctly slides
Brake seizing•
Disk/brake pads contaminated •Wheel poorly aligned •Disk/
brake pads worn •brake disc leaf/deformed •clamp not
correctly slides
15-2