Seat Dismantling; Seat Installation; Top Side Dismantling/Installation; Rear Grip - Honda 2010 CBX 250 Workshop Manual

Chassis/FAIRING/EXHAUST SYSTEM
SEAT
DISMANTLING
Unlock the saddle using the key to the ignition of agreement
with the illustration
Push the saddle backward, away the
hooks of the saddle hooks of the
INSTALLATION
Install the saddle, aligning the hooks of the saddle with
hooks of the chassis
Push the extremity rear seat forward and firmly way down.
Try to remove the saddle to ensure that is firmly
locked.
TOP SIDE
DISMANTLING/Installation
Remove the saddle (refer to the item
above). NOTE:
Be careful not to damage the projections the side covers.
Remove the bolts of the tapas side. Besides the headlight
and fuel tank. Immediately remove the cover side. The
installation is performed in reverse order dismantling.

REAR GRIP

DISMANTLING/Installation
Remove the saddle (refer to the item above). Remove the
two bolts of rear grip. Remove the two bolts and the spring
of the support for the locks of the saddle. Remove the sup-
port of the saddle. The installation is performed in reverse
order dismantling.
TAIL PIECE
DISMANTLING/Installation
Remove the saddle and tapas side (refer to the item
above). Remove the two fixing bolts the tail piece. Apart
from the projections of the tail piece and chassis. Remove
the tailpiece. The installation is performed in reverse order
dismantling.
2-2
SEAT
PROJECTION
BOLTS
TAIL PIECE
PROJECTIONS
CBX250
KEY TO THE
IGNITION
SCREW
SUPPORT FOR THE
LOCKS OF
THE SADDLE
REAR GRIP
BOLTS