CBX250
VALVE OF COURT OF AIR
Remove the two screws and the support of the adjusters cables.
Remove the cover of the valve, the spring and the
diaphragm.
NOTE
•The spring of the valve of court of air is under pressure. • To
remove the lid, be careful to the spring not jump.
Remove the spring and the valve of court of air /
diaphragm.
Check the following:
That the diaphragm is not chopped, deteriorated or
damaged
That the spring is not weakened the needle of the dia-
phragm is not frayed
To the air ducts are not obstructed
BUCKET OF FLOAT AND JETS
Remove the four screws and the vial of float.
FUEL SYSTEM
SUPPORT FOR
SCREWS
THE ADJUSTOR CABLES
TOP
DIAPHRAM
SCREW
SCREWS
SPRING
TOP
FLOAT CHAMBER