Table of Contents

Advertisement

CBX250
LIGHTS/INDICATORS/SWITCHES
In case of light is turn: Verify if there is a continuity between
the terminal of Gray cable connector relay and the earth of
the chassis. • If there is a continuity, inspect with regard to:
Connections inadequate Relay of indicator defective. •
But there is a continuity, verify if the circuit of Gray cable is
interrupted. In case of the wiring and the terminals of
connector are in good condition, replace the relay of
indicator.
CONNECTOR 3P

HORN

Remove the plate pit (page 2- 3). Release the connectors of
the horn. Connect a battery of 12 V, in good condition, dir-
ectly to the terminals of the horn. The horn will be normal,
in case of that works with the battery of 12 V connected to
their terminals.
BATTERY
HORN
19-14

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 cbf 250

Table of Contents