Installation; Silencer Dismantling; Silencer Assembly - Honda 2010 CBX 250 Workshop Manual

CBX250
SILENCER
DISMANTLING
d
Not to make services in the exhaust system while the
same is hot.
Remove the nuts and bolts of union of the exhaust pipe.
Remove the two bolts / nuts of fixing and the exhaust pipe /
silencer.
DISMANTLING
Remove the four bolts and separate the exhaust pipe, the
gasket and the silencer.
ASSEMBLY
Mount the exhaust pipe, the new gasket and the silencer.
NOTE
Always replace the gasket of the silencer for a new.

INSTALLATION

Install the whole of the exhaust pipe and the silencer. Install
temporarily all nuts and fixing bolts.
NOTE
Always replace the gasket of the exhaust pipe /
muffler for a new.
Tighten the nuts and bolts of union of the exhaust pipe
to the specified torque. Tightening Torque: 18 N. m
(kg.m) Tighten bolts and washers for fixing the exhaust
pipe / silencer.
Chassis/FAIRING/EXHAUST SYSTEM
WASHER
BOLT
Exhaust pipe/
SILENCER
SCREW/NUT
SILENCER
EXHAUST PIPE
WASHERS
BOLTS
Exhaust pipe
SCREW/NUT
SILENCER
NUTS OF
UNION
WASHER
NUEVA
BOLT
NUTS OF
UNION
WASHER
NUEVA