Braking System; Front Brake; Switch Of The Light Of Brake; Free Play Of The Brake Pedal - Honda 2010 CBX 250 Workshop Manual

CBX250

BRAKING SYSTEM

FRONT BRAKE

Tap firmly the brake forward and make sure that there is
no penetration of air in the system. In the event that the
lever is too soft or elastic to be applied, carried the purge
of air of the system. Inspect the hose brake and connec-
tions with regard to damage, cracks and signals to escape.
Tighten the connections, in case of which are weak.
Replace the hose and connections, if necessary. Refer to
page 15-3 to obtain information with regard to the
procedures of purge of the air brake system.

FREE PLAY OF THE BRAKE PEDAL

Check on the free play of the brake pedal.
Free play: 20 – 30 mm
In case of need adjustment through adjustment nut rear
brake.
NOTE
After adjusting the free play of the brake pedal check
on the functioning of switch of the light of rear brake.
Setting the switch, if necessary.

SWITCH OF THE LIGHT OF brake

NOTE
•Adjustment breaker of the light of rear brake only after setting
the play free of the brake pedal. •Switch on the light of front
brake does not need adjustment.
Setting the switch of the light of rear brake so that the light
to turn at the time that the pedal is pressed in 20 mm, im-
mediately before the brake act effectively. In case of need,
replace the switch or the defective parts of the system. Hold
the body of the switch and turn the adjustment nut. Do not
turn the body of the switch.
LID
SCREWS
HOSE OF
THE brake
SWITCH OF THE LIGHT OF rear brake
ADJUSTMENT NUT
MAINTENANCE
FIXING
PLATE
DIAPHRAM
ADJUSTMENT
NUT