Clutch/Gear Selector - Honda 2010 CBX 250 Workshop Manual

CBX250
SERVICE INFORMATION
INVESTIGATION OF FAULTS
DISMANTLING THE COVER OF THE RHS
CASING OF THE ENGING
CLUTCH
SERVICE INFORMATION
GENERAL INSTRUCTIONS
•Services of repair in the clutch and selector gears can make with the engine installed in the chassis.
•Viscosity and the level of engine oil directly affect the functioning of the clutch. It is not recommended the use of at-
tachments. If the clutch not decouples or if the motorcycle vibrates with the clutch decoupled, inspect the engine oil
and its level before make reservations in the system of clutch.
•In case of required to be made services in the transmission, drum of gears, calliper gearbox and axle of the
forks, remove the engine and apart their casing (Section 11).
•Refer to Section 11 to obtain information with regard to repair the spindle of changing gears.
SPECIFICATIONS
Clutch Free Play of the lever clutch
Free length of the spring of clutch
Thickness of the disk clutch
Twist of the plate
D. I. de la campana clutch
Guide to the bell of the clutch
D. E. of the main axle to guide to the bell of the clutch
TORQUE VALUES
Nut of locks of the body of clutch
Nut primary gear command
Bolt arm limiter drum
Bolt of the plate leva
TOOLS
Support of the body of clutch
Support of the body of clutch
9-1
9-2
9-3
9-4
Item
108 N.m (10,8 kg.m)
12 N.m (1,2 kg.m)
12 N.m (1,2 kg.m)
07724-0050002
07JMB-MN50301
9.
GEAR PRIMARY COMMAND
GEAR SELECTOR/BOX
INSTALLATION OF THE COVER ON RHS
CASING OF THE ENGINE
Value
10 – 20
35,6
2,92 – 3,08
—
25,000 – 25,021
D.I. 19,990 – 20,010
D.E. 24,959 – 24,980
19,959 – 19,980
108 N.m (10,8 kg.m)
Apply oil to the thread and to areas of set-
tlement. Lock nut of locks.
Apply oil to the thread and to areas of
settlement.

CLUTCH/GEAR SELECTOR

9-10
9-11
9-12
Unit: mm
Service Limit
—
44,7
2,69
0,30
25,04
22,05
27,90
21,91