Dismantling Of The Carburetor; Disassembly/Inspection Of The Carburetor - Honda 2010 CBX 250 Workshop Manual

CBX250

DISMANTLING OF THE CARBURETOR

Remove the following components: Fuel tank (page 2-4)
Resonator (page 5-4) Remove the valve enrichment of start
(IT). Remove the breather tube from the fund of air filter
(page 5-4).
Loosen the screws of the clamp insulator and tube clamp of
connection. Remove the cable clutch. Loosen the nuts of
the adjusters cables accelerator and the adjusters. Remove
the cables of the drum accelerator. Remove the body of the
carburetor.
DISASSEMBLY/INSPECTION OF
THE CARBURETOR
NOTE
Enter the location of each piece of the carburetor and
then install again in its original position.
Remove the bolt of acceleration of the accelerator.
Remove the drainage tube of fuel / breather tube.
FUEL SYSTEM
BOLT
SCREW ON THE TUBE CLAMP
CARBURETOR
CLUTCH
CABLE
SCREWS OF THE Clamps
DRAINAGE TUBE/BREATHER TUBE
CHOKE
RESONATOR
ADJUSTOR
CABLES
BOLT OF ACCELERATION