Honda 2012 NC700D Owner's Manual
  1. Manuals
  2. Brands
  3. Honda Manuals
  4. Motorcycle
  5. 2012 NC700D
  6. Owner's manual
Honda 2012 NC700D Owner's Manual

Honda 2012 NC700D Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

12 NC700D (NM-2)(TH)-32MGS8000.book 1 ページ ２０１２年４月１８日　水曜日　午後９時３分
This manual should be considered a permanent part of the motorcycle
and should remain with the motorcycle when it is resold.
This publication includes the latest production information available
before printing. Honda Motor Co., Ltd. reserves the right to make
changes at any time without notice and without incurring any obligation.
No part of this publication may be reproduced without written
permission.
The vehicle pictured in this owner's manual may not match your actual
vehicle.
© 2012 Honda Motor Co., Ltd.

Advertisement

Table of Contents
loading

Related Manuals for Honda 2012 NC700D

Summary of Contents for Honda 2012 NC700D

  • Page 1 This publication includes the latest production information available before printing. Honda Motor Co., Ltd. reserves the right to make changes at any time without notice and without incurring any obligation.
  • Page 2 Congratulations on your purchase of a new The following code in this manual indicates the country. Honda motorcycle. Your selection of a Honda makes you part of a worldwide family Country Code of satisfied customers who appreciate Honda’s reputation for building quality into...
  • Page 3 12 NC700D (NM-2)(TH)-32MGS8000.book 3 ページ ２０１２年４月１８日　水曜日　午後９時３分 A Few Words About Safety Your safety, and the safety of others, is very DANGER important. Operating this motorcycle safely is You WILL be KILLED or SERIOUSLY an important responsibility. HURT if you don’t follow instructions. To help you make informed decisions about safety, we have provided operating WARNING...

  • Page 4: Table Of Contents

    12 NC700D (NM-2)(TH)-32MGS8000.book 4 ページ ２０１２年４月１８日　水曜日　午後９時３分 Contents Motorcycle Safety P. 2 Operation Guide P. 14 Maintenance P. 41 Troubleshooting P. 85 Information P. 109 Specifications P. 121 Index P. 124...

  • Page 5: Motorcycle Safety

    12 NC700D (NM-2)(TH)-32MGS8000.book 2 ページ ２０１２年４月１８日　水曜日　午後９時３分 Motorcycle Safety This section contains important information for safe riding of your motorcycle. Please read this section carefully. Safety Guidelines .........P. 3 Safety Precautions ........P. 6 Riding Precautions ........P. 7 Accessories & Modifications......P. 11 Loading ............P.

  • Page 6: Safety Guidelines

    12 NC700D (NM-2)(TH)-32MGS8000.book 3 ページ ２０１２年４月１８日　水曜日　午後９時３分 Safety Guidelines Safety Guidelines that you and your passenger are both wearing an approved motorcycle helmet and protective Follow these guidelines to enhance your safety: apparel. Instruct your passenger on holding ● Perform all routine and regular inspections onto the grab rail or your waist, leaning with specified in this manual.
  • Page 7 12 NC700D (NM-2)(TH)-32MGS8000.book 4 ページ ２０１２年４月１８日　水曜日　午後９時３分 Safety Guidelines Make Yourself Easy to See Keep Your Honda in Safe Condition Make yourself more visible, especially at night, It’s important to keep your motorcycle properly by wearing bright reflective clothing, maintained and in safe riding condition.
  • Page 8 12 NC700D (NM-2)(TH)-32MGS8000.book 5 ページ ２０１２年４月１８日　水曜日　午後９時３分 Safety Guidelines check the tightness of critical nuts and bolts, WARNING and check the handlebar, control levers, brakes, and wheels. Ride slowly and cautiously. Carbon monoxide gas is toxic. Your motorcycle may have suffered damage Breathing it can cause that is not immediately apparent.

  • Page 9: Safety Precautions

    12 NC700D (NM-2)(TH)-32MGS8000.book 6 ページ ２０１２年４月１８日　水曜日　午後９時３分 Safety Precautions Safety Precautions ● Face shield with unobstructed field of vision or other approved eye protection ● Ride cautiously and keep your hands on the WARNING handlebar and feet on the floor. ● Keep passenger’s hands onto the grab rail or Not wearing a helmet increases the your waist, passenger’s feet on the footpegs...

  • Page 10: Riding Precautions

    12 NC700D (NM-2)(TH)-32MGS8000.book 7 ページ ２０１２年４月１８日　水曜日　午後９時３分 Riding Precautions Riding Precautions Brakes Observe the following guidelines: ● Running-in Period Avoid excessively hard braking and down- shifts. During the first 500 km (300 miles) of running, Sudden braking can reduce the motorcycle follow these guidelines to ensure your stability.
  • Page 11 12 NC700D (NM-2)(TH)-32MGS8000.book 8 ページ ２０１２年４月１８日　水曜日　午後９時３分 Riding Precautions ❙ ❙ Combined ABS Engine Braking Your motorcycle is equipped with a brake Engine braking helps slow your motorcycle system that distributes the braking force down when you release the throttle. For further between the front and rear brakes.
  • Page 12 12 NC700D (NM-2)(TH)-32MGS8000.book 9 ページ ２０１２年４月１８日　水曜日　午後９時３分 Riding Precautions 3. Use the side stand Parking Push the side stand down. ● Park on a firm, level paved surface. Slowly lean the motorcycle to the left until its ● If you must park on a slight incline or loose weight rests on the side stand.
  • Page 13 12 NC700D (NM-2)(TH)-32MGS8000.book 10 ページ ２０１２年４月１８日　水曜日　午後９時３分 Riding Precautions 4. Turn the handlebar fully to the left. Refuelling and Fuel Guidelines Turning the handlebar to the right reduces Follow these guidelines to protect the engine stability and may cause the motorcycle to and catalytic converter: fall.

  • Page 14: Accessories & Modifications

    Honda or make modifications to your motorcycle from its Follow all instructions in this owner’s original design. Doing so can make it unsafe.

  • Page 15: Loading

    12 NC700D (NM-2)(TH)-32MGS8000.book 12 ページ ２０１２年４月１８日　水曜日　午後９時３分 Loading Loading WARNING ● Carrying extra weight affects your Overloading or improper loading can motorcycle’s handling, braking and stability. cause a crash and you can be seriously Always ride at a safe speed for the load you hurt or killed.
  • Page 16 12 NC700D (NM-2)(TH)-32MGS8000.book 13 ページ ２０１２年４月１８日　水曜日　午後９時３分...

  • Page 17: Operation Guide

    Operation Guide 12 NC700D (NM-2)(TH)-32MGS8000.book 14 ページ ２０１２年４月１８日　水曜日　午後９時３分 Parts Location Fuel fill cap Tool kit (P37) (P34) Document bag (P37) Luggage box (P35) Inner cover (P59) Front brake fluid reservoir (P74) Front brake lever (P74) Throttle grip (P82) Parking brake lever (P26) Right front side cowl (P60)
  • Page 18 12 NC700D (NM-2)(TH)-32MGS8000.book 15 ページ ２０１２年４月１８日　水曜日　午後９時３分 (P74) Rear brake fluid reservoir Rear brake lever (P74) Fuse box (P106) (P40) Left pocket Accessory socket (P39) Seat lock (P35) Battery (P65) (P78) Drive chain (P77) Side stand Centre stand (P9) Left front side cowl (P60) Main fuse...
  • Page 19 12 NC700D (NM-2)(TH)-32MGS8000.book 16 ページ ２０１２年４月１８日　水曜日　午後９時３分 Instruments HISS B button A button Display Check When the ignition switch is turned on, all the mode and digital segments will show, and the tachometer segment progress to maximum scale and then disappear. If any part of these displays does not come on when it should, have your dealer check for problems.
  • Page 20 12 NC700D (NM-2)(TH)-32MGS8000.book 17 ページ ２０１２年４月１８日　水曜日　午後９時３分 Clock (12-hour display) (P21) To set the clock: Tachometer NOTICE Do not operate the engine in the tachometer red zone. Excessive engine speed can adversely affect engine life. Tachometer red zone (excessive engine rpm range) Speedometer Odometer [TOTAL] &...
  • Page 21 12 NC700D (NM-2)(TH)-32MGS8000.book 18 ページ ２０１２年４月１８日　水曜日　午後９時３分 Instruments HISS...
  • Page 22 12 NC700D (NM-2)(TH)-32MGS8000.book 19 ページ ２０１２年４月１８日　水曜日　午後９時３分 D indicator Comes on when the D mode is selected in the AT MODE. (P32) S indicator (P32) Comes on when the S mode is selected in the AT MODE. Gear position indicator The gear position is shown in the gear position indicator when the D, S mode or MT MODE are selected.
  • Page 23 12 NC700D (NM-2)(TH)-32MGS8000.book 20 ページ ２０１２年４月１８日　水曜日　午後９時３分 Instruments Display Setting In addition, to move the ordinary display at You can adjust the two settings. display setting. • Backlight brightness adjustment • The button is not pressed for about 30 • Clock setting seconds •...
  • Page 24 12 NC700D (NM-2)(TH)-32MGS8000.book 21 ページ ２０１２年４月１８日　水曜日　午後９時３分 2 To set the clock: Press A button. The clock is set, and then the display returns to the backlight After backlight brightness adjustment, the brightness adjustment. hour digits start flashing. Press B button until the desired hour and AM/PM are displayed.
  • Page 25 12 NC700D (NM-2)(TH)-32MGS8000.book 22 ページ ２０１２年４月１８日　水曜日　午後９時３分 Indicators Low oil pressure indicator ABS (Anti-lock Brake System) indicator Comes on when the ignition Comes on when the ignition switch is turned on. switch is turned on. Goes off when your speed reaches approximately Goes off when the engine starts.
  • Page 26 12 NC700D (NM-2)(TH)-32MGS8000.book 23 ページ ２０１２年４月１８日　水曜日　午後９時３分 Left turn signal indicator Parking brake indicator Lights as a reminder that you have not released the parking brake lever. (P111) HISS indicator • Comes on briefly when the HISS ignition switch is turned on. Goes off if the ignition key has the correct coding.
  • Page 27 12 NC700D (NM-2)(TH)-32MGS8000.book 24 ページ ２０１２年４月１８日　水曜日　午後９時３分 Switches Shift up switch (+) Engine stop switch To shift up the gear. Should normally remain in the (P33) position. In an emergency, switch to the OFF position to stop the engine. AT/MT switch To shift between the AT MODE (P32) and MT MODE.
  • Page 28 12 NC700D (NM-2)(TH)-32MGS8000.book 25 ページ ２０１２年４月１８日　水曜日　午後９時３分 Ignition Switch Turns electrical system Switches the electrical system on/off, locks the on for starting/riding. steering. Key can be removed when in the OFF or LOCK Turns engine off. position. LOCK Locks steering. ❙ Steering Lock Locking Lock the steering when parking to help...

  • Page 29: Parking Brake

    12 NC700D (NM-2)(TH)-32MGS8000.book 26 ページ ２０１２年４月１８日　水曜日　午後９時３分 Parking Brake Parking Brake Lever Be sure the parking brake is applied while parking and warming up the engine. Make sure the parking brake lever is released before riding. Squeeze To apply the parking brake Squeeze the rear brake lever and pull the Apply parking brake lever back to lock the rear...

  • Page 30: Starting The Engine

    12 NC700D (NM-2)(TH)-32MGS8000.book 27 ページ ２０１２年４月１８日　水曜日　午後９時３分 Starting the Engine Start your engine using the following NOTICE procedure, regardless of whether the engine • If the engine does not start within 5 seconds, turn the is cold or warm. ignition off and wait 10 seconds before trying to start the engine again for recovery of battery voltage.
  • Page 31 12 NC700D (NM-2)(TH)-32MGS8000.book 28 ページ ２０１２年４月１８日　水曜日　午後９時３分 Starting the Engine If the engine does not start: When you stop the engine Open the throttle fully and press the start To stop the engine, put gear to Neutral ( button for 5 seconds. indicator comes on).
  • Page 32 12 NC700D (NM-2)(TH)-32MGS8000.book 29 ページ ２０１２年４月１８日　水曜日　午後９時３分 Shifting Gears Your motorcycle is equipped with an automatically controlled 6-speed transmission. It can be shifted automatically (by AT MODE) or manually (by MT MODE). Dual Clutch Transmission In order to respond to rider demands in a N-D switch broad range of situations, the transmission is AT-MT switch...
  • Page 33 12 NC700D (NM-2)(TH)-32MGS8000.book 30 ページ ２０１２年４月１８日　水曜日　午後９時３分 Shifting Gears Neutral (N): Neutral is selected When you can change between N and D automatically when you turn the ignition Motorcycle is stopped and the engine is idling. switch to on. Throttle is completely off. It is not possible to If neutral is not selected when you turn change from Neutral to D mode while the the ignition switch to on:...
  • Page 34 12 NC700D (NM-2)(TH)-32MGS8000.book 31 ページ ２０１２年４月１８日　水曜日　午後９時３分 AT MODE: In this mode the gears are shifted MT MODE: MT MODE (6-speed manual automatically according to your riding operation) You can choose between 6 gears conditions. in this mode. And also using the shift up switch (+) or shift down switch (-), you can temporarily shift up or down.
  • Page 35 12 NC700D (NM-2)(TH)-32MGS8000.book 32 ページ ２０１２年４月１８日　水曜日　午後９時３分 Shifting Gears Changing between Neutral and AT/MT N-D switch AT-MT Changing from Neutral (N) to AT MODE switch Press the D/S side of the N-D switch The D mode indicator comes on, ”1” is shown in the gear position indicator and first gear is selected.
  • Page 36 12 NC700D (NM-2)(TH)-32MGS8000.book 33 ページ ２０１２年４月１８日　水曜日　午後９時３分 Riding in MT MODE Gear shift operation Shift up and down with the + and - switch. Shifting Up: The selected gear is shown on the gear Press the shift up switch (+) position indicator. Shifting Down: If the MT MODE is selected, the transmission Press the shift down switch (-)
  • Page 37 12 NC700D (NM-2)(TH)-32MGS8000.book 34 ページ ２０１２年４月１８日　水曜日　午後９時３分 Refuelling Fuel type: Unleaded petrol only Fuel fill cap Fuel filler opening Fuel octane number: Your motorcycle is designed to use Research Octane Number Filler neck plate (RON) 91 or higher. Fuel level (max) Tank capacity: 14.1 litres (3.73 US gal, 3.10 Imp gal) ❙...
  • Page 38 12 NC700D (NM-2)(TH)-32MGS8000.book 35 ページ ２０１２年４月１８日　水曜日　午後９時３分 Storage Equipment Luggage Box Open Insert the ignition key into the lock, and turn the key clockwise. Tabs Pull up the rear of the seat. Close Seat Push down the rear of the seat until it locks in place.
  • Page 39 12 NC700D (NM-2)(TH)-32MGS8000.book 36 ページ ２０１２年４月１８日　水曜日　午後９時３分 Storage Equipment A helmet can be stored in the luggage box. Set in the front of the helmet forward. Helmet Some helmets may not fit in the compartment due to their size or design. ❙...
  • Page 40 12 NC700D (NM-2)(TH)-32MGS8000.book 37 ページ ２０１２年４月１８日　水曜日　午後９時３分 Tool Kit Document Bag The tool kit is stored in the luggage box by The document bag is stored under the tool kit. the rubber strap. Remove the tool kit, luggage box mat and owner’s manual lid.
  • Page 41 12 NC700D (NM-2)(TH)-32MGS8000.book 38 ページ ２０１２年４月１８日　水曜日　午後９時３分 Storage Equipment Helmet Holder Use the helmet holder only when parked. The helmet holder is located under the seat. ❙ (P35) Opening the seat. A helmet set wire is in the tool kit. Helmet set wire WARNING Riding with a helmet attached to the holder can interfere with the rear...
  • Page 42 12 NC700D (NM-2)(TH)-32MGS8000.book 39 ページ ２０１２年４月１８日　水曜日　午後９時３分 Accessory Socket To prevent the battery run down or weak the battery, keep the engine running while The accessory socket is located in the drawing current from the socket. luggage box. Set the headlight in the low beam. The battery run down or damage to the Open the cover to gain access to the accessory socket cause result.
  • Page 43 12 NC700D (NM-2)(TH)-32MGS8000.book 40 ページ ２０１２年４月１８日　水曜日　午後９時３分 Storage Equipment Left Pocket Open Push the left pocket button down, then open Left pocket button the left pocket lid. Close Close the left pocket lid. The maximum allowable load in the left pocket shall be no more than 0.3 kg (0.66 lb).

  • Page 44: Maintenance

    12 NC700D (NM-2)(TH)-32MGS8000.book 41 ページ ２０１２年４月１８日　水曜日　午後９時３分 Maintenance Please read “Importance of Maintenance” and “Maintenance Fundamentals” carefully before attempting any maintenance. Refer to “Specifications” for service data. Importance of Maintenance ..... P. 42 Clip C............P. 64 Maintenance Schedule ......P. 43 Battery ............P.

  • Page 45: Importance Of Maintenance

    12 NC700D (NM-2)(TH)-32MGS8000.book 42 ページ ２０１２年４月１８日　水曜日　午後９時３分 Importance of Maintenance Importance of Maintenance Maintenance Safety Keeping your motorcycle well-maintained is Always read the maintenance instructions absolutely essential to your safety and to before you begin each task, and make sure that protect your investment, obtain maximum you have the tools, parts, and skills required.

  • Page 46: Maintenance Schedule

    Honda’s standards and specifications by properly trained and Honda recommends that your dealer should equipped technicians. Your dealer meets all road test your motorcycle after each periodic of these requirements. Keep an accurate maintenance is carried out.

  • Page 47: Maintenance Schedule

    : Inspect (clean, adjust, lubricate, or replace if necessary) you have the necessary tools and are mechanically skilled. : Lubricate Procedures are provided in an official Honda Shop Manual. : Replace : Technical. In the interest of safety, have your motorcycle : Clean serviced by your dealer.
  • Page 48 12 NC700D (NM-2)(TH)-32MGS8000.book 45 ページ ２０１２年４月１８日　水曜日　午後９時３分 Maintenance Schedule Frequency Pre-ride Annual Regular Refer to Items Check × 1,000 km Check Replace page P. 47 × 1,000 mi Evaporative Emission – Control System Drive Chain Every 1,000 km (600 mi): Drive Chain Slider Brake Fluid 2 Years Brake Pads Wear...
  • Page 49 12 NC700D (NM-2)(TH)-32MGS8000.book 46 ページ ２０１２年４月１８日　水曜日　午後９時３分 Maintenance Schedule Frequency Pre-ride Annual Regular Refer to Items Check × 1,000 km Check Replace page P. 47 × 1,000 mi Nuts, Bolts, Fasteners – Wheels/Tyres Steering Head Bearings –...

  • Page 50: Maintenance Fundamentals

    12 NC700D (NM-2)(TH)-32MGS8000.book 47 ページ ２０１２年４月１８日　水曜日　午後９時３分 Maintenance Fundamentals ● Drive chain − Check condition and slack, Pre-ride Inspection adjust and lubricate if necessary. P. 78 To ensure safety, it is your responsibility to ● Brakes − Check operation; perform a pre-ride inspection and make sure Front and Rear: check brake fluid level and that any problem you find is corrected.
  • Page 51 12 NC700D (NM-2)(TH)-32MGS8000.book 48 ページ ２０１２年４月１８日　水曜日　午後９時３分 Maintenance Fundamentals Replacing Parts WARNING Always use Honda Genuine Parts or their Installing non-Honda parts may make equivalents to ensure reliability and safety. your motorcycle unsafe and cause a crash in which you can be seriously hurt or killed.
  • Page 52 12 NC700D (NM-2)(TH)-32MGS8000.book 49 ページ ２０１２年４月１８日　水曜日　午後９時３分 Maintenance Fundamentals Battery WARNING Your motorcycle has a maintenance-free type The battery gives off explosive battery. You do not have to check the battery hydrogen gas during normal electrolyte level or add distilled water. Clean the operation.
  • Page 53 Always replace the battery with another maintenance-free battery of the same type. NOTICE Installing non-Honda electrical accessories can overload NOTICE the electrical system, discharging the battery and possibly Replacing a fuse with one that has a higher rating greatly damaging the system.
  • Page 54 Selecting the Engine Oil Conserving” on the circular API service symbol. For recommended engine oil, see “Specifications.” P. 122 If you use non-Honda engine oil, check the label to make sure that the oil satisfies all of the following standards: Not recommended Recommended ●...
  • Page 55 If either has worn or damaged teeth, NOTICE have the sprocket replaced by your dealer. Brake fluid can damage plastic and painted surfaces. Wipe up spills immediately and wash thoroughly. Recommended brake fluid: Honda DOT 4 Brake Fluid or equivalent Normal Worn Damaged (GOOD) (REPLACE)
  • Page 56 Recommended lubricant: Drive chain lubricant designed Recommended Coolant specifically for O-ring chains. Use only genuine HONDA PRE-MIX COOLANT without diluting with water. Genuine HONDA PRE-MIX COOLANT is excellent at preventing corrosion and overheating.
  • Page 57 12 NC700D (NM-2)(TH)-32MGS8000.book 54 ページ ２０１２年４月１８日　水曜日　午後９時３分 Maintenance Fundamentals ❙ Inspecting for Damage NOTICE Inspect the tyres for Using coolant not specified for aluminium engines, or cuts, slits, or cracks ordinary tap water or mineral water can cause corrosion. that exposes fabric or cords, or nails or Crankcase Breather other foreign objects...
  • Page 58 12 NC700D (NM-2)(TH)-32MGS8000.book 55 ページ ２０１２年４月１８日　水曜日　午後９時３分 Maintenance Fundamentals ❙ Inspecting Tread Depth WARNING Inspect the tread wear indicators. If they become visible, replace the tyres immediately. Riding on tyres that are excessively For safe riding, you should replace the tyres worn or improperly inflated can cause when the minimum tread depth is reached.
  • Page 59 Always use the size and type of tyres ● Have the wheel balanced with Honda recommended in this owner’s manual. Genuine balance weights or equivalents after the tyre is installed. ●...
  • Page 60 12 NC700D (NM-2)(TH)-32MGS8000.book 57 ページ ２０１２年４月１８日　水曜日　午後９時３分 Maintenance Fundamentals Air Cleaner This motorcycle is equipped with a viscous type air cleaner element. Air blow cleaning or any other cleaning can degrade the viscous element performance and cause the intake of dust. Do not perform the maintenance.

  • Page 61: Tool Kit

    12 NC700D (NM-2)(TH)-32MGS8000.book 58 ページ ２０１２年４月１８日　水曜日　午後９時３分 Tool Kit The tool kit is stored under the seat. P. 37 You can perform some roadside repairs, minor adjustments and parts replacement with the tools contained in the kit. ● Spark plug wrench ●...

  • Page 62: Removing & Installing Body Components

    12 NC700D (NM-2)(TH)-32MGS8000.book 59 ページ ２０１２年４月１８日　水曜日　午後９時３分 Removing & Installing Body Components Inner Cover The inner cover must be removed to service the main and fuse box fuses, and remove the front side cowls. Bolts ❙ Removal 1. Remove the bolts. 2.

  • Page 63: Front Side Cowls

    12 NC700D (NM-2)(TH)-32MGS8000.book 60 ページ ２０１２年４月１８日　水曜日　午後９時３分 Removing & Installing Body Components Front Side Cowls Front Side Cowls The front side cowls must be removed for the headlight bulb, front turn signal light bulbs and position light bulbs replacement. Left side The left and right front side cowls can be removed in the same manner.

  • Page 64: Front Lower Cover

    12 NC700D (NM-2)(TH)-32MGS8000.book 61 ページ ２０１２年４月１８日　水曜日　午後９時３分 Removing & Installing Body Components Front Lower Cover Front Lower Cover The front lower cover must be removed to service the coolant reserve tank, and remove the right floor skirt. ❙ Removal 1. Remove the bolts and clips A. P.

  • Page 65: Right Floor Skirt

    12 NC700D (NM-2)(TH)-32MGS8000.book 62 ページ ２０１２年４月１８日　水曜日　午後９時３分 Removing & Installing Body Components Right Floor Skirt Right Floor Skirt The right floor skirt must be removed to replace the clutch oil filter. Grommet Floor mat ❙ Removal 1. Remove the front lower cover. P.

  • Page 66: Clip A

    12 NC700D (NM-2)(TH)-32MGS8000.book 63 ページ ２０１２年４月１８日　水曜日　午後９時３分 Removing & Installing Body Components Clip A Clip A Clip B The clip A must be removed to remove the The clip B must be removed to remove the front side cowls, front lower cover and right front side cowls.

  • Page 67: Clip C

    12 NC700D (NM-2)(TH)-32MGS8000.book 64 ページ ２０１２年４月１８日　水曜日　午後９時３分 Removing & Installing Body Components Clip C Clip C The clip C must be removed to remove the maintenance lid. ❙ Removal 1. Press down on the centre pin to release the lock. 2. Pull the clip out of the hole. Centre ❙...

  • Page 68: Battery

    12 NC700D (NM-2)(TH)-32MGS8000.book 65 ページ ２０１２年４月１８日　水曜日　午後９時３分 Removing & Installing Body Components Battery ❙ Battery Removal Make sure the ignition switch is off. 1. Open the seat. P. 35 Positive Maintenance lid 2. Remove the owner’s manual lid. P. 37 terminal 3.

  • Page 69: Engine Oil

    12 NC700D (NM-2)(TH)-32MGS8000.book 66 ページ ２０１２年４月１８日　水曜日　午後９時３分 Engine Oil Checking the Engine Oil Oil fill cap/dipstick 1. Park your motorcycle in on its centre stand Upper level on a firm, level surface. 2. If the engine is cold, idle the engine for 3 to 5 minutes.

  • Page 70: Adding Engine Oil

    12 NC700D (NM-2)(TH)-32MGS8000.book 67 ページ ２０１２年４月１８日　水曜日　午後９時３分 Engine Oil Adding Engine Oil Adding Engine Oil NOTICE Overfilling with oil or operating with insufficient oil can If the engine oil is below or near the lower cause damage to your engine. Do not mix different brands level mark, add the recommended engine oil.
  • Page 71 Changing Engine Oil & Filter Changing the oil and filter requires special tools. We recommend that you have your motorcycle serviced by your dealer. Use a new Honda Genuine oil filter or Sealing washer equivalent specified for your model. NOTICE...
  • Page 72 12 NC700D (NM-2)(TH)-32MGS8000.book 69 ページ ２０１２年４月１８日　水曜日　午後９時３分 Engine Oil Changing Engine Oil & Filter 9. Install a new sealing washer onto the drain bolt. Tighten the drain bolt. Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft). 10. Fill the crankcase with the recommended oil ( P.
  • Page 73 Changing Clutch Oil Filter 3. Remove the clutch oil filter cover, clutch oil filter and spring by removing the Use a new Honda Genuine clutch oil filter or clutch oil filter bolts. equivalent specified for your model. Discard the oil and clutch oil filter at an approved recycling centre.
  • Page 74 12 NC700D (NM-2)(TH)-32MGS8000.book 71 ページ ２０１２年４月１８日　水曜日　午後９時３分 Engine Oil Changing Clutch Oil Filter 4. Install the new clutch oil filter with the 10. Install a new sealing washer onto the “OUT-SIDE” mark facing out. drain bolt. Tighten the drain bolt. 5. Replace the O-ring and apply a thin coat Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft).

  • Page 75: Coolant

    12 NC700D (NM-2)(TH)-32MGS8000.book 72 ページ ２０１２年４月１８日　水曜日　午後９時３分 Coolant Checking the Coolant If the coolant level is dropping noticeably or the reserve tank is empty, you likely have a 1. Place your motorcycle on a firm, level serious leak. Have your motorcycle inspected surface.

  • Page 76: Changing Coolant

    12 NC700D (NM-2)(TH)-32MGS8000.book 73 ページ ２０１２年４月１８日　水曜日　午後９時３分 Coolant Changing Coolant 3. Remove the reserve tank cap and add fluid while monitoring the coolant level. Do not overfill above the upper level mark. Make sure no foreign objects enter the reserve tank opening. 4.

  • Page 77: Brakes

    12 NC700D (NM-2)(TH)-32MGS8000.book 74 ページ ２０１２年４月１８日　水曜日　午後９時３分 Brakes Checking Brake Fluid If the brake fluid level in either reservoir is below the LOWER level mark or both the 1. Place your motorcycle in an upright brake levers freeplay becomes excessive, position on a firm, level surface. inspect the brake pads for wear.
  • Page 78 12 NC700D (NM-2)(TH)-32MGS8000.book 75 ページ ２０１２年４月１８日　水曜日　午後９時３分 Brakes Inspecting the Brake Pads Inspecting the Brake Pads Front Inspect the brake pads from below the brake caliper. Check the condition of the brake pad wear Rear Inspect the brake pads from the indicators.
  • Page 79 12 NC700D (NM-2)(TH)-32MGS8000.book 76 ページ ２０１２年４月１８日　水曜日　午後９時３分 Brakes Inspecting the Parking Brake Inspecting the Parking Brake Place your motorcycle on a firm, level surface. Stop the engine and push your motorcycle while applying the parking brake lever to check the efficacy of the parking brake. If the efficacy of the parking brake become weak, have the brake adjusted by your dealer.

  • Page 80: Side Stand

    12 NC700D (NM-2)(TH)-32MGS8000.book 77 ページ ２０１２年４月１８日　水曜日　午後９時３分 Side Stand 5. Start the engine and press the D/S side of N-D switch to switch the transmission into D mode. 6. Lower the side stand all the way. The engine should stop as you lower the side stand.

  • Page 81: Drive Chain

    12 NC700D (NM-2)(TH)-32MGS8000.book 78 ページ ２０１２年４月１８日　水曜日　午後９時３分 Drive Chain Inspecting the Drive Chain 3. Check the slack in the lower half of the drive chain midway between the Slack sprockets. Check the drive chain slack at several points Drive chain slack: along the chain.

  • Page 82: Adjusting The Drive Chain Slack

    12 NC700D (NM-2)(TH)-32MGS8000.book 79 ページ ２０１２年４月１８日　水曜日　午後９時３分 Drive Chain Adjusting the Drive Chain Slack 5. Inspect the sprockets. P. 52 Lock nut 6. Clean and lubricate the drive chain. P. 53 Adjusting the Drive Chain Slack Adjusting the chain requires special tools. Have the drive chain slack adjusted by your Rear axle nut dealer.
  • Page 83 12 NC700D (NM-2)(TH)-32MGS8000.book 80 ページ ２０１２年４月１８日　水曜日　午後９時３分 Drive Chain Adjusting the Drive Chain Slack 5. Turn both adjusting nuts an equal number 7. Tighten the rear axle nut. of turns until the correct drive chain slack Torque: 98 N·m (10.0 kgf·m, 72 lbf·ft). is obtained.
  • Page 84 12 NC700D (NM-2)(TH)-32MGS8000.book 81 ページ ２０１２年４月１８日　水曜日　午後９時３分 Drive Chain Checking the Drive Chain Slider ❙ Checking the Drive Chain Slider Checking the Drive Chain Wear Check the chain wear label when adjusting Check the condition of the drive chain slider. the drive chain. If the allow mark on the The drive chain slider need to be replaced if it chain adjuster plate enters the red zone on is worn to the wear limit line.

  • Page 85: Throttle

    12 NC700D (NM-2)(TH)-32MGS8000.book 82 ページ ２０１２年４月１８日　水曜日　午後９時３分 Throttle Checking the Throttle With the engine off, check that the throttle rotates smoothly from fully closed to fully open in all steering positions and throttle freeplay is correct. If the throttle does not move smoothly, close automatically, or if the cable is damaged, have the motorcycle inspected by your dealer.

  • Page 86: Crankcase Breather

    12 NC700D (NM-2)(TH)-32MGS8000.book 83 ページ ２０１２年４月１８日　水曜日　午後９時３分 Crankcase Breather Cleaning the Crankcase Breather 1. Remove the crankcase breather tube plug from the tube. 2. Drain deposits into a suitable container. 3. Install the crankcase breather tube plug. Crankcase breather tube plug...

  • Page 87: Other Adjustments

    12 NC700D (NM-2)(TH)-32MGS8000.book 84 ページ ２０１２年４月１８日　水曜日　午後９時３分 Other Adjustments Adjusting the Headlight Aim You can adjust vertical aim of the headlight for proper alignment. Turn the pinion using a Phillips screwdriver provided in the tool kit P. 58) in or out as necessary. Obey local laws and regulations.

  • Page 88: Troubleshooting

    12 NC700D (NM-2)(TH)-32MGS8000.book 85 ページ ２０１２年４月１８日　水曜日　午後９時３分 Troubleshooting Engine Will Not Start (HISS indicator stays Other Warning Indication ......P. 91 on)............P. 86 Fuel Gauge Failure Indication.....P. 91 Overheating (High coolant temperature Tyre Puncture ..........P. 92 indicator is on) ......... P. 87 Electrical Trouble........P.

  • Page 89: Engine Will Not Start (Hiss Indicator Stays On)

    12 NC700D (NM-2)(TH)-32MGS8000.book 86 ページ ２０１２年４月１８日　水曜日　午後９時３分 Engine Will Not Start (HISS indicator stays on) ❙ Starter Motor Operates But Engine Check if there are no any metallic seals Does Not Start or stickers on the key. If the HISS indicator still stays on, have Check the following items: your motorcycle inspected by your ●...

  • Page 90: Overheating (High Coolant Temperature Indicator Is On)

    12 NC700D (NM-2)(TH)-32MGS8000.book 87 ページ ２０１２年４月１８日　水曜日　午後９時３分 Overheating (High coolant temperature indicator is on) The engine is overheating when the 2. Check that the radiator fan is operating, following occurs: and then turn the ignition switch to the ● High coolant temperature indicator comes OFF position.

  • Page 91: Warning Indicators On Or Flashing

    12 NC700D (NM-2)(TH)-32MGS8000.book 88 ページ ２０１２年４月１８日　水曜日　午後９時３分 Warning Indicators On or Flashing Low Oil Pressure Indicator If the engine oil level goes down rapidly, your motorcycle may have a leak or another If the low oil pressure indicator comes on, serious problem. Have your motorcycle pull safely to the side of the road and stop inspected by your dealer.

  • Page 92: Abs (Anti-Lock Brake System) Indicator

    12 NC700D (NM-2)(TH)-32MGS8000.book 89 ページ ２０１２年４月１８日　水曜日　午後９時３分 Warning Indicators On or Flashing ABS (Anti-lock Brake System) Indicator ABS (Anti-lock Brake System) If the ABS indicator stays on, your brakes will continue to work as a conventional system, Indicator but without the anti-locking function. If the indicator operates in one of the The ABS indicator may flash if you turn the following ways, you may have a serious...

  • Page 93: If The "-" Indicator Is Blinking In The Gear Position Window While Riding

    12 NC700D (NM-2)(TH)-32MGS8000.book 90 ページ ２０１２年４月１８日　水曜日　午後９時３分 If the “-” Indicator is Blinking in the Gear Position Window While Riding If the “-” indicator is blinking while riding, If you still cannot start the engine: you may have a serious problem with the Start the engine while applying the front or Dual Clutch Transmission system.

  • Page 94: Other Warning Indication

    12 NC700D (NM-2)(TH)-32MGS8000.book 91 ページ ２０１２年４月１８日　水曜日　午後９時３分 Other Warning Indication Fuel Gauge Failure Indication If the fuel system has an error, the fuel gauge indicators will be displayed as shown in the illustration. If this occurs, see your dealer as soon as possible.

  • Page 95: Tyre Puncture

    12 NC700D (NM-2)(TH)-32MGS8000.book 92 ページ ２０１２年４月１８日　水曜日　午後９時３分 Tyre Puncture Repairing a puncture or removing a wheel WARNING requires special tools and technical expertise. We recommend you have this type of service Riding your motorcycle with a performed by your dealer. temporary tyre repair can be risky. If After an emergency repair, always have the the temporary repair fails, you can tyre inspected/replaced by your dealer.
  • Page 96 12 NC700D (NM-2)(TH)-32MGS8000.book 93 ページ ２０１２年４月１８日　水曜日　午後９時３分 Tyre Puncture Removing Wheels ❙ Front Wheel Support the brake caliper assembly so that it doesn’t hang from the brake Removal hose. Do not twist the brake hose. 1. Park your motorcycle on its centre stand Avoid getting grease, oil, or dirt on on a firm, level surface.
  • Page 97 12 NC700D (NM-2)(TH)-32MGS8000.book 94 ページ ２０１２年４月１８日　水曜日　午後９時３分 Tyre Puncture Removing Wheels 4. Loosen the axle pinch bolt. Installation 5. Support your motorcycle securely and 1. Attach the side collars to the wheel. raise the front wheel off the ground 2. On the left side, place the wheel using a maintenance stand or a hoist.
  • Page 98 12 NC700D (NM-2)(TH)-32MGS8000.book 95 ページ ２０１２年４月１８日　水曜日　午後９時３分 Tyre Puncture Removing Wheels 4. Install the brake caliper and tighten the 8. Raise the front wheel off the ground mounting bolts. again, and check that the wheel rotates freely after you release the brake. Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft).
  • Page 99 12 NC700D (NM-2)(TH)-32MGS8000.book 96 ページ ２０１２年４月１８日　水曜日　午後９時３分 Tyre Puncture Removing Wheels ❙ Rear Wheel Mounting bolts Removal 1. Park your motorcycle on its centre stand on a firm, level surface. 2. Release the parking brake. 3. Remove the mounting bolts and remove the parking brake caliper.
  • Page 100 12 NC700D (NM-2)(TH)-32MGS8000.book 97 ページ ２０１２年４月１８日　水曜日　午後９時３分 Tyre Puncture Removing Wheels 4. Loosen the rear axle nut, lock nuts and Wheel speed sensor turn the adjusting nuts so the rear wheel can be moved all the way forward for Pulser ring maximum drive chain slack.
  • Page 101 12 NC700D (NM-2)(TH)-32MGS8000.book 98 ページ ２０１２年４月１８日　水曜日　午後９時３分 Tyre Puncture Removing Wheels Installation 2. Make sure that the slot on the brake 1. To install the rear wheel, reverse the caliper bracket is positioned in the lug on removal procedure. the swingarm. Take care to prevent the brake caliper Brake caliper from scratching the wheel during...
  • Page 102 12 NC700D (NM-2)(TH)-32MGS8000.book 99 ページ ２０１２年４月１８日　水曜日　午後９時３分 Tyre Puncture Removing Wheels 3. Adjust the drive chain. P. 79 7. Install the parking brake caliper and 4. Install and tighten the rear axle nut. tighten the mounting bolts. Torque: 98 N·m (10.0 kgf·m, 72 lbf·ft). Torque: 31 N·m (3.2 kgf·m, 23 lbf·ft).

  • Page 103: Electrical Trouble

    12 NC700D (NM-2)(TH)-32MGS8000.book 100 ページ ２０１２年４月１８日　水曜日　午後９時３分 Electrical Trouble Battery Goes Dead Burned-out Light Bulb Charge the battery using a motorcycle Follow the procedure below to replace a battery charger. burned-out light bulb. Remove the battery from the motorcycle Turn the ignition switch to the OFF or LOCK while charging.
  • Page 104 12 NC700D (NM-2)(TH)-32MGS8000.book 101 ページ ２０１２年４月１８日　水曜日　午後９時３分 Electrical Trouble Burned-out Light Bulb ❙ Headlight Bulb 1. Remove the front side cowl. P. 60 2. Pull off the socket without turning. 3. Remove the dust cover. 4. Press the pin down and pull out the bulb without turning it.
  • Page 105 12 NC700D (NM-2)(TH)-32MGS8000.book 102 ページ ２０１２年４月１８日　水曜日　午後９時３分 Electrical Trouble Burned-out Light Bulb ❙ Position Light Bulb 1. Remove the front side cowl. P. 60 2. Pull off the socket without turning. 3. Pull out the bulb without turning. 4. Install a new bulb and parts in the reverse order of removal.
  • Page 106 12 NC700D (NM-2)(TH)-32MGS8000.book 103 ページ ２０１２年４月１８日　水曜日　午後９時３分 Electrical Trouble Burned-out Light Bulb ❙ Brake/Tail Light Bulb 5. Turn the socket counterclockwise, and remove it. 1. Remove the screw A. Bulb Screw B Brake/tail light assembly Screw A Socket Under side of Bolts the rear fender 6.
  • Page 107 12 NC700D (NM-2)(TH)-32MGS8000.book 104 ページ ２０１２年４月１８日　水曜日　午後９時３分 Electrical Trouble Burned-out Light Bulb ❙ Front Turn Signal Bulb 1. Remove the front side cowl. P. 60 2. Turn the socket counterclockwise, and remove it. 3. Slightly press the bulb and turn it counterclockwise.
  • Page 108 12 NC700D (NM-2)(TH)-32MGS8000.book 105 ページ ２０１２年４月１８日　水曜日　午後９時３分 Electrical Trouble Burned-out Light Bulb ❙ Rear Turn Signal Bulb Turn signal lens Bulb Screw 1. Remove the screw. 2. Remove the turn signal lens. 3. Slightly press the bulb and turn it counterclockwise. 4.

  • Page 109: Blown Fuse

    12 NC700D (NM-2)(TH)-32MGS8000.book 106 ページ ２０１２年４月１８日　水曜日　午後９時３分 Electrical Trouble Blown Fuse Blown Fuse 1. Remove the inner cover. P. 59 2. Remove the fuse box cover. Before handling fuses, see “Inspecting and 3. Pull the fuses out with the fuse puller in Replacing Fuses.”...
  • Page 110 12 NC700D (NM-2)(TH)-32MGS8000.book 107 ページ ２０１２年４月１８日　水曜日　午後９時３分 Electrical Trouble Blown Fuse ❙ Main Fuse 1. Remove the inner cover. P. 59 2. Open the seat. P. 35 3. Remove the bolt and clip A. P. 63 Bolt 4. Pull the left side panel back. Left side Clip A panel...
  • Page 111 12 NC700D (NM-2)(TH)-32MGS8000.book 108 ページ ２０１２年４月１８日　水曜日　午後９時３分 Electrical Trouble Blown Fuse 5. Disconnect the wire connector of the Wire Main fuse starter magnetic switch. connector 6. Pull the main fuse out with the fuse puller in the tool kit and check for a blown fuse. Always replace a blown fuse with a spare of the same rating.

  • Page 112: Information

    12 NC700D (NM-2)(TH)-32MGS8000.book 109 ページ ２０１２年４月１８日　水曜日　午後９時３分 Information Keys............P. 110 Instruments, Controls, & Other Features...P. 111 Fuels Containing Alcohol......P. 113 Catalytic Converter ........P. 114 Caring for Your Motorcycle.....P. 115 Storing Your Motorcycle ......P. 117 Transporting Your Motorcycle ....P. 118 You & the Environment ......P. 119 Serial Numbers .........P.

  • Page 113: Keys

    12 NC700D (NM-2)(TH)-32MGS8000.book 110 ページ ２０１２年４月１８日　水曜日　午後９時３分 Keys Keys To make a duplicate key and register it with your HISS system, take the spare key, the key number plate, and the motorcycle to your Ignition key dealer. The ignition key contains a special coded chip that is recognized by the immobilizer system A metal key holder may cause damage to the (HISS) in order to start the engine.

  • Page 114: Instruments, Controls, & Other Features

    Ignition Switch HISS The headlight is always on when the ignition The Honda Ignition Security System (HISS) switch is on. Leaving the ignition switch on with immobilizes the engine’s ignition system if an the engine stopped will drain the battery.
  • Page 115 12 NC700D (NM-2)(TH)-32MGS8000.book 112 ページ ２０１２年４月１８日　水曜日　午後９時３分 Instruments, Controls, & Other Features 1. With the ignition switch on, press and hold Document Bag the A button ( P. 16) for 2 seconds or more The owner’s manual, registration, and when the display function mode is odometer. insurance information can be stored in the The HISS indicator flashes once.

  • Page 116: Fuels Containing Alcohol

    12 NC700D (NM-2)(TH)-32MGS8000.book 113 ページ ２０１２年４月１８日　水曜日　午後９時３分 Fuels Containing Alcohol Fuels Containing Alcohol NOTICE Use of blended fuels containing higher than approved Some conventional fuels blended with alcohol percentages can damage metal, rubber, plastic parts of are available in some locales to help reduce your fuel system.

  • Page 117: Catalytic Converter

    A defective catalytic converter contributes to air pollution and can impair your engine’s performance. A replacement unit must be an original Honda part or equivalent.

  • Page 118: Caring For Your Motorcycle

    Frequent cleaning and polishing is important to 3. Thoroughly rinse your motorcycle with plenty ensure the long life of your Honda. A clean of clean water and dry with a soft, clean motorcycle makes it easier to spot potential cloth.
  • Page 119 12 NC700D (NM-2)(TH)-32MGS8000.book 116 ページ ２０１２年４月１８日　水曜日　午後９時３分 Caring for Your Motorcycle ❙ Washing Precautions should dissipate after a few minutes of Follow these guidelines when washing: running the engine. ● ● Do not use high-pressure washers: Do not use waxes containing compounds at High-pressure water cleaners can damage the mat painted surface: moving parts and electrical parts,...

  • Page 120: Storing Your Motorcycle

    12 NC700D (NM-2)(TH)-32MGS8000.book 117 ページ ２０１２年４月１８日　水曜日　午後９時３分 Storing Your Motorcycle ● Storing Your Motorcycle Wash gently using a soft sponge and plenty of water. ● To remove stubborn stains, use diluted detergent If you store your motorcycle outdoors, you should and rinse thoroughly with plenty of water. consider using a full-body motorcycle cover.

  • Page 121: Transporting Your Motorcycle

    12 NC700D (NM-2)(TH)-32MGS8000.book 118 ページ ２０１２年４月１８日　水曜日　午後９時３分 Transporting Your Motorcycle Transporting Your After removing your motorcycle from storage, inspect all maintenance items required by the Motorcycle Maintenance Schedule. If your motorcycle needs to be transported, it should be carried on a motorcycle trailer or a flatbed truck or trailer that has a loading ramp or lifting platform, and motorcycle tie-down straps.

  • Page 122: You & The Environment

    12 NC700D (NM-2)(TH)-32MGS8000.book 119 ページ ２０１２年４月１８日　水曜日　午後９時３分 You & the Environment You & the Environment drain or on the ground. Used oil, petrol, coolant, and cleaning solvents contain poisons Owning and riding a motorcycle can be that can hurt refuse workers and contaminate enjoyable, but you must do your part to protect drinking water, lakes, rivers, and oceans.

  • Page 123: Serial Numbers

    12 NC700D (NM-2)(TH)-32MGS8000.book 120 ページ ２０１２年４月１８日　水曜日　午後９時３分 Serial Numbers Serial Numbers The frame and engine serial numbers uniquely identify your motorcycle and are required in order to register your motorcycle. They may also be required when ordering replacement parts. The frame number is stamped on the right side of the steering head.

  • Page 124: Specifications

    12 NC700D (NM-2)(TH)-32MGS8000.book 121 ページ ２０１２年４月１８日　水曜日　午後９時３分 Specifications Specifications ■ Main Components Displacement 670 cm (40.9 cu-in) Type RC65 Bore × stroke 73.0 × 80.0 mm (2.87 × 3.15 in) Overall length 2,195 mm (86.4 in) Compression ratio 10.7:1 Overall width 790 mm (31.1 in) Unleaded petrol Fuel...

  • Page 125: Service Data

    Recommended adjustable) 0.043 in) HONDA PRE-MIX COOLANT coolant Idle speed 1,200 ± 100 rpm Honda 4-stroke motorcycle oil API Service Recommended Classification SG or higher, excluding oils engine oil marked as “Energy Conserving,” SAE 10W-30, JASO T 903 standard MA...
  • Page 126 12 NC700D (NM-2)(TH)-32MGS8000.book 123 ページ ２０１２年４月１８日　水曜日　午後９時３分 Specifications ■ Torque Specifications Recommended drive Drive chain lubricant designed specifically chain lubricant for O-ring chains Engine oil drain bolt 30 N·m (3.1 kgf·m, 22 lbf·ft) Drive chain slack 25 to 35 mm (1.0 to 1.4 in) Oil filter 26 N·m (2.7 kgf·m, 19 lbf·ft) DID 520V0 or RK 520MKO...

  • Page 127: Index

    12 NC700D (NM-2)(TH)-32MGS8000.book 124 ページ ２０１２年４月１８日　水曜日　午後９時３分 Index Index ABS (Anti-lock Brake System) Caring for Your Motorcycle ....115 Indicator..........22, 89 Catalytic Converter ........114 Accessories ..........11 Clutch Oil Filter ..........70 Accessory Socket........39 Combined ABS ..........8 AT Mode ........19, 29, 31, 32 Coolant..........53, 72 Crankcase Breather........83 AT/MT Switch..........
  • Page 128 12 NC700D (NM-2)(TH)-32MGS8000.book 125 ページ ２０１２年４月１８日　水曜日　午後９時３分 Environment..........119 Headlight Dimmer Switch......24 Equipment Helmet Holder ........... 38 Owner’s Manual ......37, 112 High Beam Indicator ......... 23 Tool Kit ..........37, 58 High Coolant Temperature Indicator ..........22, 87 HISS Indicator ........23, 86 Flooded Engine .........
  • Page 129 12 NC700D (NM-2)(TH)-32MGS8000.book 126 ページ ２０１２年４月１８日　水曜日　午後９時３分 Parking Brake Indicator......23 Maintenance Parts Location ..........14 Fundamentals........... 47 Passing Light Control Switch.....24 Importance..........42 Petrol ..........34, 113 Safety............42 PGM-FI (Programmed Fuel Injection) Schedule ..........43 malfunction indicator lamp (MIL)..22, 88 Maximum Weight Limit ......12 Protective Apparel........6 Modifications..........
  • Page 130 12 NC700D (NM-2)(TH)-32MGS8000.book 127 ページ ２０１２年４月１８日　水曜日　午後９時３分 Switches ............. 24 S Mode........19, 29, 31, 32 Safety Precautions ........6 Seat ............35 Tachometer..........17 Serial Numbers ........120 Throttle ............82 Shift Switch ..........24 Tool Kit ..........37, 58 Transporting Your Motorcycle ....

Table of Contents