Gears; Bushes; Main Axle/Countershaft; Drum Of Gearbox/Stump Drum - Honda 2010 CBX 250 Workshop Manual

CBX250
INSPECTION

Gears

Inspect the projections and rebated coupling of the gears
with regard to excessive wear or damage.
Inspect the teeth of the gears with regard to excessive
wear or damage.
Measure the D. I. of each gear.
M5
M6
C1
Service Limit
C2
C3
C4

Bushes

Inspect the bushes with regard to wear or damage.
Measure the D. E. of each bush.
Buje C1
Service Limit
Buje C2
Measure the D. I. of each bush.
Buje C1
Service Limit
Buje C2

Main Axle/Countershaft

Inspect the striated and the surfaces of slippage of the
main axle and the countershaft with regard to abnor-
mal wear or damage. Measure the D. E. shaft and
countershaft in areas of the areas of slip of the hubs
and gears.
Service Main Axle (the bush M5)
Limit Countershaft (the bush C1)
Countershaft (the bush C2 and C4)
Calcule la holgura entre cada engranaje y su respectivo buje;
cada buje y el eje; y cada engranaje y el eje.
Service
Slack between gear and the bush
Limit
Slack between the hub and the axle C1/C2 0,10 mm

Drum of gearbox/Stump drum

Inspect the tip of the drum of gearbox with regard to scratches,
wear or evidence of insufficient lubrication. Inspect the slots in
guide of the drum of gearbox with regard to abnormal wear or
damage. Measure the D. E. from the right edge of the drum.
Service Limit
20,08 mm
23,07 mm
23,07 mm
25,09 mm
25,07 mm
22,07 mm
22,90 mm
24,90 mm
18,08 mm
22,08 mm
19,91 mm
17,91 mm
21,91 mm
0,10 mm
19,90 mm
DRUM OF gears
TRANSMISSION