Values Of Tightening Torque; Clutch/Gear Selector - Honda 2010 CBX 250 Workshop Manual

CBX250

VALUES OF TIGHTENING torque

Type of fixing
Screw hexagonal nut 5 mm
Screw and hexagonal nut 6 mm
(Including the screw with flange SH)
Bolt hexagonal nut 8 mm
Bolt hexagonal nut of 10 mm
Bolt hexagonal nut 12 mm
• The specifications of tightening torque listed below are for the fixers more important. • Other fixers
must be tightened in accordance with the values of tightening torque Value above.NOTES:
1. Apply liquid sealed (sealer) to the thread.
2. Apply firming agent (locks chemistry) to the thread.
3. Apply olive carbon disulphide of molybdenum to the thread and to the surface of
settlement.
4. Thread left.
5. Lock.
6. Apply oil to the thread and to the surface of settlement.
7. Apply motor oil clean in the o ring.
8. Bolt UBS.
9. Nut - U (capacity)
10. Bolt ALOC: replace it with a new one.
11. Apply grease. Engine
Maintenance
Spark Plug power
Top of the hole of the crankshaft
Top of the hole of synchronisation
Bolt drainage of engine oil
Cylinder head/Valves
Bolt the door of the cylinder head
Bolt the support of Camshaft
Nut of the cylinder head
Bolt of superior connection of the tube of oil from the cylinder head

Clutch/Gear selector

Nut of locks of the body of clutch
Nut primary gear command
Bolt arm limiter
Alternator/Clutch starter motor
Bolt of engine flywheel
Bolt Torx clutch start
Bolt for fixing the pulse generator power
Bolt of fixing the stator
Bolt of pin wiring stator
Transmission
Bolt to the plate of fixing of the bearing of the main axle
Bolt ear of the spring of return of the drum of
gears
Bolt connecting the bottom of the tube of oil from the cylinder head
Other fixers
Bolt to the plate of cams of changing gears
Bolt of terminal breaker of deadlock
Body breaker deadlock
Bolt to the plate of fixing the sprocket of transmission
Top of the relief valve of the oil pump
Torque
N.m (kg.m)
5 (0,5)
10 (1,0)
22 (2,2)
34 (3,4)
54 (5,4)
Item
Type of fixing
Screw 5 mm
Screw 6 mm
Bolt flange and nut 6 mm
(including NSHF)
Bolt flange and nut 8 mm
Bolt flange and nut 10 mm
Diameter of
Number
thread (mm)
1 10
1 30
1 14
1 12
3 6
8 6
4 10
1 7
1 16
1 16
1 6
1 12
6 6
2 5
3 6
1 6
2 6
1 8
2 8
1 6
1 4
1 10
2 6
1 14
GENERAL INFORMATION
Torque
N.m (kg.m)
4 (0,4)
9 (0,9)
12 (1,2)
26 (2,6)
39 (3,9)
Torque
Note
N.m (kg.m)
12 (1,2)
8 (0,8) Note 11
10 (1,0) Note 11
30 (3,0)
12 (1,2)
12 (1,2) Note 6
45 (4,5) Note 6
12 (1,2)
108 (10,8) Notes 5, 6
108 (10,8) Note 6
12 (1,2)
103 (10,3) Note 6
16 (1,6) Note 2
5 (0,5)
10 (1,0)
10 (1,0)
12 (1,2) Note 2
24 (2,4)
12 (1,2)
12 (1,2) Note 2
2 (0,2)
12 (1,2)
10 (1,0)
19 (1,9)
1-13