Honda 2010 CBX 250 Workshop Manual page 150

CBX250
Lubricate a new o ring with motor oil and install in the
top gear the boot.
Install the lid of intermediate gear boot and tighten the
four bolts.
Guide correctly the wiring to the alternator (page 1-21).
Plug the connectors alternator and the pulse generator
power / switch of deadlock.
Install the following components:
Top side (page 2-2).
Lens piñon transmission (page 6-6).
ALTERNATOR
TOP GEAR INTERMEDIATE
BOOT
CONNECTOR 3P FROM THE PULSE GENERATOR
POWER/SWITCH DEADLOCK
CONNECTOR 3P ALTERNATOR
O-RING
NUEVO