Installation Of The Cylinder - Honda 2010 CBX 250 Workshop Manual

PISTON/CYLINDER
Install the new clips of cotter pin
i
Always use clips new. Never reuse the clips, because
it can cause serious damage to the engine.
NOTE
•Make sure that the clips of cotter pin are firmly es-
tablished. •Not align the extremities of the clips of the
cotter pin with the lowering of the piston.

INSTALLATION OF THE CYLINDER

NOTE
•To clean the surface of contact of the cylinder, place a
cloth in the opening of the cylinder, to prevent the entry
of dust and dirt in the engine.
•Not reuse the gasket. Replace it with a new.
Install the ears of guide and a new gasket.
i
Be careful not to damage the cylinder wall and the
rings of the piston.
Guided the chain of distribution through the cylinder and
install the cylinder on the piston while compresses the
rings of the piston with your fingers.
Install the cylinder head (Section 7).
8-8
NUEVO
COTTER PIN CLIP
GUIDE SPIKES
DISTRIBUTION CHAIN
CBX250
NUEVA
GASKET
CYLINDER