Gear Primary Command - Honda 2010 CBX 250 Workshop Manual

CLUTCH/GEAR SELECTOR
Install the springs of clutch, the plate operated and the
respective bolts on the plate of pressure.
Tighten bolts in sequence, mixed in several steps. Then,
tighten firmly.
Install the lid right side of the casing of the engine (page
9-12).

GEAR PRIMARY COMMAND

DISMANTLING
Remove the cover right side of the casing of the engine
(page 9-3).
Remove the components of clutch (page 9-4).
Using the special tool remove the nut and washer gear
primary command, according to the illustration.
Tool:
Support of the body of the clutch:
Remove the washer and the primary gear command of the crankshaft.
INSTALLATION
Install the primary gear command aligning its slot wider
with the striated more width of the crankshaft.
9-10
07724-0050002
BOLT/SPRING
NUT AND WASHER
SUPPORT OF THE BODY OF CLUTCH
GEAR PRIMARY COMMAND
WASHER
STRIATED WIDE
GEAR PRIMARY COMMAND
CBX250
PLATE OPERATED
BROADBAND SLOT