Chassis/Fairing/Exhaust System; Research Of Breakdowns; Escape With Excessive Noise; Poor Performance - Honda 2010 CBX 250 Workshop Manual

CBX250
INFORMATION SERVICE

RESEARCH OF BREAKDOWNS

SEAT
TOP SIDE
REAR GRIP
TAIL PIECE
INFORMATION SERVICE
GENERAL Instructions
d
•The petrol (gasoline) is extremely flammable and explosive under certain conditions. Keep out of the reach of chil-
dren. •Work on a local well ventilated. The presence of cigarettes, flames or sparks in the local labour or where
stocks petrol (gasoline) can cause a fire or explosion. •In case of that is necessary to make services with the
engine running, make sure that the local work is well ventilated. Never put the engine running in closed areas.
The exhaust containing carbon monoxide poison, which can cause loss of consciousness and even death. Put
the engine running in a local open, or in a local closed equipped with a ventilation system and extraction of gas.
•Parts of the exhaust system, the engine and the engine oil heated too and thus remain for some time, even after
the engine has ceased to function. Be careful not to burn. Wear gloves with thermal insulation. •Before dis-
mantling or repair of any component Make sure that the exhaust system has cooled. Otherwise, they may occur
serious burns.
• This section is the removing and installing the fairing, fuel tank and the exhaust system. •Always to
disassemble the exhaust pipe of the engine, replace their gaskets. •To install the exhaust system, to keep loosened all
its fixers. Always tighten first the clamps and then the fixers, or: bolts and / or nuts. Otherwise, the settlement of the
exhaust pipe may prove to be wrong. •After installation, check provided the exhaust system with regard to leak.
VALUES OF TIGHTENING torque
Union Nut of the exhaust pipe
RESEARCH OF BREAKDOWNS

Escape with excessive noise

• Exhaust System damaged
• Flight of the exhaust

Poor Performance

• Exhaust System deformed
• Flight of the exhaust
• Silencer obstructed
2-1 REAR FENDERS
2-1 PLATE SIDE PIT
2-2 FUEL TANK
2-2 FRONT FENDERS
2-2 SILENCER
2-2
18 N.m (1,8 kg.m)
2. Chassis/FAIRING/
EXHAUST SYSTEM
2-3
2-3
2-4
2-4
2-5