Balance Of The Wheel - Honda 2010 CBX 250 Workshop Manual

FRONT WHEEL/SUSPENSION/STEERING

Balance of the wheel

i
The balance of the wheel directly affects the stability,
driving and, above all, the security of the motorcycle.
Always check the balance of the wheel after the assembly
of the tire.
NOTE
To reach an optimum balance of the tire, the mark of
balance (point painted on the flank of the same) will be
near the offspring of the valve. Install again the tire, in
case of need.
Check the mark of turning direction of the tire.
Remove the coveralls hub of the wheel.
Arming the wheel, the tire and the whole of the disc brake in
a support for inspection.
Turn the wheel, leave stop and check the point of the wheel
that has been down (heavier) with chalk.
Repeat this procedure two or three times, to check the area
heavier.
In case of wheel is balanced, this does not stop always in the
same position.
To balance the wheel, install the balances on the side highest
(more mild) of the rim, or is: the opposite side to the marks of
chalk.
Add only the counterweight necessary for the wheel no more
stops at the same position, to be rotated.
Do not add more than 60 programs to the wheel.
DISMANTLING
Remove the dust and the detaining the spiral of the speedometer.
13-10
BRAND OF BALANCE
BRAND OF TURNING DIRECTION
SUPPORT FOR
INSPECTION
RETENEDOR GEAR
CBX250
VALVE
DUST COVER