Fuel System - Honda 2010 CBX 250 Workshop Manual

CBX250
SERVICE INFORMATION
INVESTIGATION OF FAULTS
BOX OF AIR FILTER
DISMANTLING OF THE CARBURETOR
DISASSEMBLY/INSPECTION
OF THE CARBURETOR
SERVICE INFORMATION
GENERAL INSTRUCTIONS
d
•Petrol (gasoline) is highly inflammable and explosive under certain conditions. Keep out of the reach of children.
•In case of that is necessary to make services with the engine running, make sure that the local work is well
ventilated. Never put the engine running in closed areas. •The exhaust containing carbon monoxide poison,
which can cause loss of consciousness and even death. Activates the engine in a local open, or in a local
closed equipped with a ventilation system and extraction of gas. •Control Cables twisted or bent not operate
smoothly and can agarrotarse or bogged down, resulting in the loss of control of the motorcycle. •Work in
well-ventilated areas. The presence of cigarettes, flames or sparks in the local labour or where stocks petrol
(gasoline) can cause fire or explosion.
i
•So that the diaphragms do not suffer damage, be sure to removing before cleaning the air ducts and fuel
with compressed air. •Do not remove the connection of the tube of sub air filter, except by replacing it.
•Refer to the page 2-4 to obtain information with regard to removing and installing the fuel tank. •Prior to dismantling the
carburetor, place a suitable below the bucket of float, release the screw drainage and drain the carburetor. •After
removing the carburetor protects the inlet of the engine with a cloth or cover it with adhesive tape, with the aim of
preventing the entry of foreign materials in the interior of the engine. •To dismantle the components of the fuel
system, look for the location of the rings o. Replace them with new ones during installation.
NOTE
In case of motorcycle will remain inactive for more than a month, drain the tank of the float. If it leaves the fuel in the
tank, the jets are may obstruct, hamper the start and damaging the management.

5. FUEL SYSTEM

5-1
5-3
5-4
5-5
5-5
ASSEMBLY OF THE CARBURETOR
INSTALLATION OF THE CARBURETOR
CHOKE VALVE
SETTING THE idle screw
5-9
5-13
5-14
5-14